无忧启动论坛

标题: [建议]利用U盘的VID和PID来汇总成功案例的主控。附工具。 [打印本页]

作者: ggsh007 时间: 2007-6-10 00:55
标题: [建议]利用U盘的VID和PID来汇总成功案例的主控。附工具。
[建议]利用U盘的VID和PID来汇总成功案例的主控。
U盘的VID和PID分别是芯片的身份证号和产品序列号，对同一芯片而言，其VID是相对稳定的，同一系列之间是有规律的，产品序列号PID对于正规厂家而言也应该有章可循。因此，大家把成功实现USB－CDROM启动的案例汇总后，可以形成一个数据库，以供查询。

如本例：
联想扬天128M：
iManufacturer:                   0x01
   English (United States)  "CHIPSBNK"
iProduct:                         0x02
   English (United States)  "UMP V1.6.8"
iSerialNumber:                   0x03
   English (United States)  "ABCDEF1234000196"
idVendor:          0x17EF
idProduct:       0x3815
附工具如下：

usbview.zip (33.66 KB, 下载次数: 1234)

UVCViewX86.rar (53.69 KB, 下载次数: 1208)

[ 本帖最后由 ggsh007 于 2007-6-10 12:58 AM 编辑 ]

作者: mhkangjw 时间: 2007-6-10 01:19
下载收藏先，顶起。楼主不妨写下2工具的特性或使用要点，供不熟悉的朋友参考。

作者: 穿云鹤 时间: 2007-6-10 05:48
建议不错，但这种信息是否很准确还未知，我和朋友同时买了2个清华紫光Z-18型2G优盘，当时用CheckUDisk测试，我的生产商是芯邦信息。朋友信息是完全不同，可惜当时没有截图，当时也不懂什么是主控芯片，知道这种优盘都是OEM产品，只以为不是同批次产品，品质用材不一样吧。

过后在找到了芯邦量化工具umptool2090尝试制作USB-CDROM成功后，才认识了主控的作用，由于找到了对应的量化工具，才使这个普通优盘有了特殊的作用。成功之后试试朋友那个优盘是否也能用，打开量化工具后却完全相同，也使用芯邦量化工具制作usb-cdrom。但现在用CheckUDisk完全不能识别我的优盘了，完全空白。没有一点信息。

现在下载了楼主提供的工具，能识别：

idVendor:                      0x17EFidProduct:                      0x3815
bcdDevice:                      0x0100
iManufacturer:                   0x01
   English (United States)  "CHIPSBNK"
iProduct:                         0x02
   English (United States)  "UMP V1.6.8"
iSerialNumber:                   0x03
   English (United States)  "301801000F309C00"
bNumConfigurations:             0x01

但不知道如果再次量化操作是否信息改变，我会继续测试，要说明的是，其中多项数据可以在量化工具中任意修改

[ 本帖最后由穿云鹤于 2007-6-10 06:17 AM 编辑 ]

作者: 穿云鹤 时间: 2007-6-10 08:16
都是上面相同的优盘，我试了一下用1.63版本的工具低格一次，信息变化很大：
idVendor:                      0x1976idProduct:                      0x6025
bcdDevice:                      0x0100
iManufacturer:                   0x01
   English (United States)  "???a????"
iProduct:                         0x02
   English (United States)  "CHIPSBANK"
iSerialNumber:                   0x03
   English (United States)  "0618004BF07D0000"
bNumConfigurations:             0x01

再次用1.69版本低格一次：
idVendor:                      0x17EFidProduct:                      0x3815
bcdDevice:                      0x0100
iManufacturer:                   0x01
   English (United States)  "CHIPSBNK"
iProduct:                         0x02
   English (United States)  "UMP V1.6.9"
iSerialNumber:                   0x03
   English (United States)  "10071500095D5600"
bNumConfigurations:             0x01

说明，不同版本量化的信息是不同的。不知这样能否起到作用。

作者: 穿云鹤 时间: 2007-6-10 08:28
采用高级格式化时失败，[由于已经制成USB-CDROM，高级格式化不能完成]，提取信息如下：
idVendor:                      0x0420idProduct:                      0x1307
bcdDevice:                      0x0100
iManufacturer:                   0x00
iProduct:                         0x00
iSerialNumber:                   0x00
bNumConfigurations:             0x01
No String Descriptors for this device (not an error)

作者: chnhhwz 时间: 2007-6-10 11:30
朗科USB200优盘
HDD格式
检测结果见图

Snap1.gif (5.01 KB, 下载次数: 139)

作者: victor888 时间: 2007-6-10 12:07
我把这个数据库也附上吧，希望大家好好研究，等确认后，将考虑固顶。
http://devel.lindows.com/cgi-bin/hwdb.cgi?view=usb_components

作者: 穿云鹤 时间: 2007-6-10 14:52
大家都没看明白我的信息吧？我上面发的是同一个优盘识别信息，不同版本格式化不一样，所以这样就不准了。

作者: goaway 时间: 2007-6-10 16:49
标题: 我的Kingston DataTraveler DTI/1GB
---===>Device Information<===---
English product name: "DataTraveler 2.0"

ConnectionStatus:
Current Config Value:             0x01  -> Device Bus Speed: High
Device Address:                   0x01
Open Pipes:                         2

      ===>Device Descriptor<===
bLength:                         0x12
bDescriptorType:                0x01
bcdUSB:                         0x0200
bDeviceClass:                   0x00  -> This is an Interface Class Defined Device
bDeviceSubClass:                0x00
bDeviceProtocol:                0x00
bMaxPacketSize0:                0x40 = (64) Bytes
idVendor:                      0x13FEidProduct:                      0x1A00
bcdDevice:                      0x0100
iManufacturer:                   0x01
   English (United States)  "Kingston"
iProduct:                         0x02
   English (United States)  "DataTraveler 2.0"
iSerialNumber:                   0x03
   English (United States)  "5B690480637B"
bNumConfigurations:             0x01

      ===>Configuration Descriptor<===
bLength:                         0x09
bDescriptorType:                0x02
wTotalLength:                   0x0020  -> Validated
bNumInterfaces:                   0x01
bConfigurationValue:             0x01
iConfiguration:                   0x00
bmAttributes:                   0x80  -> Bus Powered
MaxPower:                         0x64 = 200 mA

      ===>Interface Descriptor<===
bLength:                         0x09
bDescriptorType:                0x04
bInterfaceNumber:                0x00
bAlternateSetting:                0x00
bNumEndpoints:                   0x02
bInterfaceClass:                0x08  -> This is a Mass Storage USB Device Interface Class
bInterfaceSubClass:             0x06
bInterfaceProtocol:             0x50
iInterface:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x81  -> Direction: IN - EndpointID: 1
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x02  -> Direction: OUT - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

作者: ggsh007 时间: 2007-6-10 18:09
应该发原始U盘的信息以及型号。这样才便于大家按图索骥，对新购U盘也有一定的指示作用。
穿云鹤上士所指的情况可否理解为不同的厂家对于相同主控的产品序列号是不同的，但是拿到手的新U盘的信息是厂家的，应该还是有一定的参考意义。至少，对于两个号码完全相同的产品，可以认为是同一种产品，所不同的是外面标识的SN号码，SN号码同样有其自己的规律。对于量产工具而言，这些都是可以改动的，这也正是厂家的权利，和带给我们的障碍。如果厂家都用OEM指定的号码，我们就不用试来试去的了。

[ 本帖最后由 ggsh007 于 2007-6-10 06:20 PM 编辑 ]

作者: junyee 时间: 2007-6-10 21:09
9楼的兄弟，kingston是否成功模拟成USB-cdrom了?

成功了跟我打个招呼啊~~麻烦了。。

作者: su6410 时间: 2007-6-26 09:17
标题: 我的Kingston DataTraveler DTI/4GB，请教我的U盘主控型号是什么，信息如下：
---===>Device Information<===---
English product name: "DataTraveler 2.0"

ConnectionStatus:
Current Config Value:             0x01  -> Device Bus Speed: High
Device Address:                   0x01
Open Pipes:                         2

      ===>Device Descriptor<===
bLength:                         0x12
bDescriptorType:                0x01
bcdUSB:                         0x0200
bDeviceClass:                   0x00  -> This is an Interface Class Defined Device
bDeviceSubClass:                0x00
bDeviceProtocol:                0x00
bMaxPacketSize0:                0x40 = (64) Bytes
idVendor:                      0x13FEidProduct:                      0x1D00
bcdDevice:                      0x0110
iManufacturer:                   0x01
   English (United States)  "Kingston"
iProduct:                         0x02
   English (United States)  "DataTraveler 2.0"
iSerialNumber:                   0x03
   English (United States)  "5B741B9C2D6A"
bNumConfigurations:             0x01

      ===>Configuration Descriptor<===
bLength:                         0x09
bDescriptorType:                0x02
wTotalLength:                   0x0020  -> Validated
bNumInterfaces:                   0x01
bConfigurationValue:             0x01
iConfiguration:                   0x00
bmAttributes:                   0x80  -> Bus Powered
MaxPower:                         0x64 = 200 mA

      ===>Interface Descriptor<===
bLength:                         0x09
bDescriptorType:                0x04
bInterfaceNumber:                0x00
bAlternateSetting:                0x00
bNumEndpoints:                   0x02
bInterfaceClass:                0x08  -> This is a Mass Storage USB Device Interface Class
bInterfaceSubClass:             0x06
bInterfaceProtocol:             0x50
iInterface:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x81  -> Direction: IN - EndpointID: 1
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x02  -> Direction: OUT - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

作者: su6410 时间: 2007-6-26 09:24
标题: 我的Kingston DataTraveler DTI/4GB制作启动盘的问题
我想将深山红叶工具盘移置在金士顿逸盘（DTI/4G）里，使用FlashBoot 1.4制作的DOS U盘不能引导，HP优盘格式化工具HPUSBFW 格式化U盘，将深山红叶工具盘移置在金士顿逸盘（DTI/4G）里（使用GRUB引导），能在我的笔记本电脑能引导成功，单位使用的联想开天S4700无法引导成功，
经试验将深山红叶工具盘移置到金士顿逸盘（DTI/512）使用FlashBoot 1.4制作的DOS U盘（使用NT的ntldr引导）采用USB-ZIP方式，（使用NT的ntldr引导）两款微机均能引导成功。
经过分析HP优盘格式化工具将U盘格式化成 USB-HDD FAT32，USB-HDD引导方式兼容性好象不好， FlashBoot 1.4制作的DOS U盘只能制作FAT16格式，最大支持2G ，4G的U盘经FlashBoot 1.4格式化后，4GFAT16分区是错误的，导致不能引导。因此需要将U盘分区，一分区做启动盘容量小于2G， FlashBoot 1.4制作的 USB-ZIP格式引导U盘，将深山红叶工具盘移置在金士顿逸盘，兼容性会更好。在网上找了很多U盘分区软件，没有一个能识别金士顿逸盘，请问有谁将金士顿逸盘（DTI/512）成功分区吗，有的话，请回复，邮箱su6410@163.com，谢谢！

作者: tuka 时间: 2007-6-26 10:05
标题: 联想磨盘 B210 256MB
---===>Device Information<===---
English product name: "USB DISK"

ConnectionStatus:
Current Config Value:             0x01  -> Device Bus Speed: High
Device Address:                   0x01
Open Pipes:                         2

      ===>Device Descriptor<===
bLength:                         0x12
bDescriptorType:                0x01
bcdUSB:                         0x0200
bDeviceClass:                   0x00  -> This is an Interface Class Defined Device
bDeviceSubClass:                0x00
bDeviceProtocol:                0x00
bMaxPacketSize0:                0x40 = (64) Bytes
idVendor:                      0x0E7CidProduct:                      0x16AB
bcdDevice:                      0x3000
iManufacturer:                   0x01
   English (United States)  "Lenovo FlashDisk"
iProduct:                         0x02
   English (United States)  "USB DISK"
iSerialNumber:                   0x03
   English (United States)  "AA04012700616"
bNumConfigurations:             0x01

      ===>Configuration Descriptor<===
bLength:                         0x09
bDescriptorType:                0x02
wTotalLength:                   0x0020  -> Validated
bNumInterfaces:                   0x01
bConfigurationValue:             0x01
iConfiguration:                   0x00
bmAttributes:                   0x80  -> Bus Powered
MaxPower:                         0x32 = 100 mA

      ===>Interface Descriptor<===
bLength:                         0x09
bDescriptorType:                0x04
bInterfaceNumber:                0x00
bAlternateSetting:                0x00
bNumEndpoints:                   0x02
bInterfaceClass:                0x08  -> This is a Mass Storage USB Device Interface Class
bInterfaceSubClass:             0x06
bInterfaceProtocol:             0x50
iInterface:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x81  -> Direction: IN - EndpointID: 1
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0xFF

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x02  -> Direction: OUT - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0xFF

作者: sanichui 时间: 2007-6-27 11:19
楼上的，我们是一样的U盘，你用了什么量产工具没有！！！

作者: chunlin 时间: 2007-6-27 16:13
SSK读卡器+1G TF卡就是不知用哪个工具量化，试了N种量化工具，N次都没成功。有谁说声。谢~
Device Descriptor:
bcdUSB:          0x0200
bDeviceClass:       0x00
bDeviceSubClass:    0x00
bDeviceProtocol:    0x00
bMaxPacketSize0:    0x40 (64)
idVendor:          0x05E3 (Genesys Logic Inc.)
idProduct:       0x0717
bcdDevice:       0x9407
iManufacturer:       0x03
iProduct:          0x04
iSerialNumber:       0x02
bNumConfigurations: 0x01

作者: papersnake 时间: 2007-6-30 13:14
工具在哪里可以下载到啊

作者: ljq997 时间: 2007-7-5 10:50
新用户，没权限~~~~:@

作者: yujij 时间: 2007-7-5 21:17
标题: 我的 kingmax 蓝色超棒
---===>Device Information<===---
English product name: "USB Mass Storage Device"

ConnectionStatus:
Current Config Value:             0x01  -> Device Bus Speed: High
Device Address:                   0x01
Open Pipes:                         3

      ===>Device Descriptor<===
bLength:                         0x12
bDescriptorType:                0x01
bcdUSB:                         0x0200
bDeviceClass:                   0x00  -> This is an Interface Class Defined Device
bDeviceSubClass:                0x00
bDeviceProtocol:                0x00
bMaxPacketSize0:                0x40 = (64) Bytes
idVendor:                      0x0457 = Silicon Integrated Systems Corp.
idProduct:                      0x0151
bcdDevice:                      0x0100
iManufacturer:                   0x00
iProduct:                         0x02
   English (United States)  "USB Mass Storage Device"
iSerialNumber:                   0x03
   English (United States)  "0300000000030F"
bNumConfigurations:             0x01

      ===>Configuration Descriptor<===
bLength:                         0x09
bDescriptorType:                0x02
wTotalLength:                   0x0027  -> Validated
bNumInterfaces:                   0x01
bConfigurationValue:             0x01
iConfiguration:                   0x00
bmAttributes:                   0x80  -> Bus Powered
MaxPower:                         0x31 =  98 mA

      ===>Interface Descriptor<===
bLength:                         0x09
bDescriptorType:                0x04
bInterfaceNumber:                0x00
bAlternateSetting:                0x00
bNumEndpoints:                   0x03
bInterfaceClass:                0x08  -> This is a Mass Storage USB Device Interface Class
bInterfaceSubClass:             0x06
bInterfaceProtocol:             0x50
iInterface:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x01  -> Direction: OUT - EndpointID: 1
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x01

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x82  -> Direction: IN - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x01

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x83  -> Direction: IN - EndpointID: 3
bmAttributes:                   0x03  -> Interrupt Transfer Type
wMaxPacketSize:                0x0040 = 1 transactions per microframe, 0x40 max bytes
bInterval:                      0x08

作者: vectorlinux 时间: 2007-7-5 22:00
我的  台电酷闪晶彩II 1G ,看信息好象是SIS的芯片,不知道用何量产工具?

---===>Device Information<===---
English product name: "USB Mass Storage Device"

ConnectionStatus:
Current Config Value:             0x01  -> Device Bus Speed: High
Device Address:                   0x01
Open Pipes:                         3

      ===>Device Descriptor<===
bLength:                         0x12
bDescriptorType:                0x01
bcdUSB:                         0x0200
bDeviceClass:                   0x00  -> This is an Interface Class Defined Device
bDeviceSubClass:                0x00
bDeviceProtocol:                0x00
bMaxPacketSize0:                0x40 = (64) Bytes
idVendor:                      0x0457 = Silicon Integrated Systems Corp.
idProduct:                      0x0151
bcdDevice:                      0x0100
iManufacturer:                   0x00
iProduct:                         0x02
   English (United States)  "USB Mass Storage Device"
iSerialNumber:                   0x03
   English (United States)  "000000000000DB"
bNumConfigurations:             0x01

      ===>Configuration Descriptor<===
bLength:                         0x09
bDescriptorType:                0x02
wTotalLength:                   0x0027  -> Validated
bNumInterfaces:                   0x01
bConfigurationValue:             0x01
iConfiguration:                   0x00
bmAttributes:                   0x80  -> Bus Powered
MaxPower:                         0x31 =  98 mA

      ===>Interface Descriptor<===
bLength:                         0x09
bDescriptorType:                0x04
bInterfaceNumber:                0x00
bAlternateSetting:                0x00
bNumEndpoints:                   0x03
bInterfaceClass:                0x08  -> This is a Mass Storage USB Device Interface Class
bInterfaceSubClass:             0x06
bInterfaceProtocol:             0x50
iInterface:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x01  -> Direction: OUT - EndpointID: 1
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x01

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x82  -> Direction: IN - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x01

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x83  -> Direction: IN - EndpointID: 3
bmAttributes:                   0x03  -> Interrupt Transfer Type
wMaxPacketSize:                0x0040 = 1 transactions per microframe, 0x40 max bytes
bInterval:                      0x08

作者: wooddy 时间: 2007-7-6 00:52
我也用的Kingston 4G，晕了，争取能做成功、、、、

作者: gzdiky 时间: 2007-7-14 21:34
我用的是和9 楼的一样是金士顿一G 的成功的话也开个贴.通告一下

作者: gzdiky 时间: 2007-7-15 11:01
标题: 回复 #1 ggsh007 的帖子
名称：DataTraveler 2.0 (USB2.0)

逻辑盘符：H:\

VID&PID：Vid_0951&Pid_1603
传输速度：high speed

制造商ID：Kingston
产品ID：DataTraveler 2.0
产品版本：1.00

制造商信息：Kingston
产品信息：DataTraveler 2.0
序列号：00000000000000000000004B

这是我的U盘是什么.主控蕊片的呢/

作者: jasonwang 时间: 2007-7-16 15:25
这个是什么主控？
      ---===>Device Information<===---
English product name: "USB Flash Disk"

ConnectionStatus:
Current Config Value:             0x01  -> Device Bus Speed: High
Device Address:                   0x01
Open Pipes:                         2

      ===>Device Descriptor<===
bLength:                         0x12
bDescriptorType:                0x01
bcdUSB:                         0x0200
bDeviceClass:                   0x00  -> This is an Interface Class Defined Device
bDeviceSubClass:                0x00
bDeviceProtocol:                0x00
bMaxPacketSize0:                0x40 = (64) Bytes
idVendor:                      0x0DD8idProduct:                      0x0C00
bcdDevice:                      0x0100
iManufacturer:                   0x01
   English (United States)  "Netac"
iProduct:                         0x02
   English (United States)  "USB Flash Disk"
iSerialNumber:                   0x03
   English (United States)  "39B87FD2BF42F436"
bNumConfigurations:             0x01

      ===>Configuration Descriptor<===
bLength:                         0x09
bDescriptorType:                0x02
wTotalLength:                   0x0020  -> Validated
bNumInterfaces:                   0x01
bConfigurationValue:             0x01
iConfiguration:                   0x00
bmAttributes:                   0x80  -> Bus Powered
MaxPower:                         0xFA = 500 mA

      ===>Interface Descriptor<===
bLength:                         0x09
bDescriptorType:                0x04
bInterfaceNumber:                0x00
bAlternateSetting:                0x00
bNumEndpoints:                   0x02
bInterfaceClass:                0x08  -> This is a Mass Storage USB Device Interface Class
bInterfaceSubClass:             0x06
bInterfaceProtocol:             0x50
iInterface:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x02  -> Direction: OUT - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x82  -> Direction: IN - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

作者: tdrax 时间: 2007-7-23 19:31
:L :L 没人能知道自己的主控芯:o :o :o

作者: lkkd 时间: 2007-7-29 22:01
名称：USB DISK 2.0 (USB2.0)

逻辑盘符：H:\

VID&PID：Vid_13fe&Pid_1a00
传输速度：high speed

制造商ID：GEIL
产品ID：USB DISK 2.0
产品版本：PMAP

制造商信息：GEIL
产品信息：USB DISK 2.0
序列号：90690C000310

作者: lkkd 时间: 2007-7-29 22:33
HYNIX_HY27UT084G2M

PHISON
P52134CH-G

作者: hongjunh 时间: 2007-7-31 01:02
没威望了:) :( :D :'(

作者: hongjunh 时间: 2007-7-31 01:03
:P :$ 没威望了:) :( :D :'( :@

作者: jckim 时间: 2007-8-2 10:30
不错喔~~~~~~~~~~~~~~

作者: tjCFeng 时间: 2007-8-15 11:34
还要威望吗？

作者: wpz 时间: 2007-8-16 13:38
---===>Device Information<===---
English product name: "Mass Storage Device"

ConnectionStatus:
Current Config Value:             0x01  -> Device Bus Speed: High
Device Address:                   0x01
Open Pipes:                         2

      ===>Device Descriptor<===
bLength:                         0x12
bDescriptorType:                0x01
bcdUSB:                         0x0200
bDeviceClass:                   0x00  -> This is an Interface Class Defined Device
bDeviceSubClass:                0x00
bDeviceProtocol:                0x00
bMaxPacketSize0:                0x40 = (64) Bytes
idVendor:                      0x058F = Alcor Micro, Corp.
idProduct:                      0x9380
bcdDevice:                      0x0001
iManufacturer:                   0x01
   English (United States)  "Alcor Micro"
iProduct:                         0x02
   English (United States)  "Mass Storage Device"
iSerialNumber:                   0x00
bNumConfigurations:             0x01

      ===>Configuration Descriptor<===
bLength:                         0x09
bDescriptorType:                0x02
wTotalLength:                   0x0020  -> Validated
bNumInterfaces:                   0x01
bConfigurationValue:             0x01
iConfiguration:                   0x00
bmAttributes:                   0x80  -> Bus Powered
MaxPower:                         0x32 = 100 mA

      ===>Interface Descriptor<===
bLength:                         0x09
bDescriptorType:                0x04
bInterfaceNumber:                0x00
bAlternateSetting:                0x00
bNumEndpoints:                   0x02
bInterfaceClass:                0x08  -> This is a Mass Storage USB Device Interface Class
bInterfaceSubClass:             0x06
bInterfaceProtocol:             0x50
iInterface:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x01  -> Direction: OUT - EndpointID: 1
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

      ===>Endpoint Descriptor<===
bLength:                         0x07
bDescriptorType:                0x05
bEndpointAddress:                0x82  -> Direction: IN - EndpointID: 2
bmAttributes:                   0x02  -> Bulk Transfer Type
wMaxPacketSize:                0x0200 = 0x200 max bytes
bInterval:                      0x00

作者: alongljty 时间: 2007-12-5 22:33
我都下了好多了啦！可是没有一个是符合的！也不知道这个行不行啊！下了再试试看喽！

欢迎光临无忧启动论坛 (http://wuyou.net/)