F:\>tree f:\ /F |more
卷 LB1PFRE_EN 的文件夹 PATH 列表
卷序列号为 B15B-30AC
F:\
│ autorun.inf
│ boot.ini (也许,我么可以使用这个东西载入 grub 了。)
│ bootmgr ( 配合这个)
│ readme.htm
│ readme.txt
│ setup.exe
│
├─boot
│ boot.sdi (一个 只有 NTFS 基本信息的 sdi 文件,里面根目录下似乎没有任何东西。 ;) )
│ bootfix.bin
│
├─docs
│ relnotes.htm
│ setup.htm
│ unattend_sample.xml
│
├─drivers
avldr for WinVI';s Bootmgr by Gandalf
===========================================
这个程序,是在使用传统的 ntldr 载入
系统的 Windows 2000/xp/2k3 系统中,用以 WinVI
的新载入程序 BOOTMGR 的工具。虽然,传承于 avldr
for grub, 但是,当前它只能用于 ntldr 方式,而
暂时不能在纯 DOS 下使用!! <切记>
为什么要作这个程序?
--------------------------
WinVI 的启动器 Bootmgr 可以同时运行于光盘
和硬盘,并且使用和 ntldr 相同的配置文件。但是,
在功能上, bootmgr 更为强大一些。他能载入 wim
这一个新的文件格式。由于这个格式可以用来载入
WinPE,而且能够使用 lzx 方式对文件进行压缩,所以
使用的前景很好,^_^。 所以,我们有这样的结论:
- 使用 bootmgr, 由于采用了 boot.ini 的可配置
方式,我们能构同时在 cd/dvd/hdd 上载入不同的 WinPE
实现 xWinPE(当然可以使用 WIM 技术); (这有待验证)
- 支持 wim 格式,采用 lzx 后,可以节省存储空间;
- 承袭于 ntldr, 可以很好的支持 cdrom, ram, hdd,
以及 sdi, wim 方式载入对象。 ^_^
... ... 也许还有潜在的应用。
可是,在 ntldr 环境中,我们要使用这个新东西
来验证我们的想法,难道一定要 WinVI installed?!
NO! we have the avldr! ;-) 当然,也许我们还有别的
方法可以使用,但是,我觉得这个方法可能更为灵活和
安全些。 所以,就。。。 。。。
如何使用?
------------------------------------
如果你是用过 avldr b1,那么你一定知道如何加载它,
如果尚未接触过 avldr, 那么请访问一下站点获取帮助:
http://sysoft.zdwx.com/aviator/
REMOVING WINDOWS VISTA FROM YOUR SYSTEM
1. If you installed Build 5048 as a standalone operating system on its own PC, then simply reformat the hard drive it is on.
2. (a) If you have Dual Booted with another operating system, for example Windows XP, then boot into Windows XP and go to Disk Management (right click My Computer>Manage>Disk Management).
Select the drive you have Windows Vista installed on, right click it and select Format. A quick format should be all you need.
2. (b) Proceed to and use the Quick Removal Method below.
3. If you have Windows Vista installed on a system with multiple operating systems, i.e. two or more in addition to Windows Vista, use the Complete Removal Method.
QUICK REMOVAL METHOD
Go to the Run dialogue box on your start menu and type “msconfig” (without the quotes). This will open the System Configuration Utility. Then go to the BOOT.INI tab and select "Check All Boot Paths".
This is automatic and all you need to do after this is select “OK” and “Apply” and "Restart".
On restart, place a check in the System dialogue box that pops up.
Note: This method while easy to use and effective has its shortcomings. It does not carry out a full cleanup of your system and leaves traces of the Longhorn installation on your Windows XP system drive. These will however not interfere with your Windows XP installation. Should you wish to fully remove Windows Vista from your system, use the Complete Removal Method.
COMPLETE REMOVAL METHOD
With Windows Vista still fully installed, boot to your Windows XP installation. Go to Start>Run and type "C:\boot\fixntfs -XP" (without the quotes) and click OK. Restart your system.
When the system reboots you will notice that the Windows Vista bootloader no longer exists.
Boot into Windows XP again and go to Disk Management (right click My Computer>Manage>Disk Management).
Select the drive you have Windows Vista installed on, right click it and select Format. A quick format should be all you need.
Now go to Windows Explorer and delete the following files from the root of your Windows XP installation hard drive or partition:
----------------------------
Boot (folder)
Boot.BAK
bootmgr
BOOTSECT.BAK
----------------------------
Right click My Computer, select Properties>Advanced>Startup and Recovery>Settings and under System startup, make sure that Windows XP is selected as the Default operating system. If not, then select it as Default operating system and select OK at the foot of the Startup and Recovery user interface and again select OK at the foot of System Properties user interface.
(Modifying the contents of one’s boot.ini file and bootsector may lead to not being able to access the operating system. Only experienced user’s comfortable doing so should use this method).
Return to My Computer, select Properties>Advanced>Startup and Recovery>Settings and this time select Edit. In the Notepad file that opens, select and delete all lines mentioning Windows Vista and then in that Notepad file, go to File and select Save.
Close Notepad and select OK at the foot of the Startup and Recovery user interface and again select OK at the foot of the System Properties user interface.
To confirm that your boot.ini file is now correct, go to the Run dialogue box on your start menu and type “msconfig” (without the quotes). This will open the System Configuration Utility. Go to the BOOT.INI tab and select "Check All Boot Paths".
You should get a dialogue box appearing with the message “It appears that all BOOT.INI lines for Microsoft operating systems are OK”. Restart your system
欢迎光临 无忧启动论坛 (http://wuyou.net/) | Powered by Discuz! X3.3 |