无忧启动论坛

标题: 想找一个sata+firadisk的合盘 [打印本页]

作者: qqbab 时间: 2015-2-1 12:00
标题: 想找一个sata+firadisk的合盘
想找一个综合了sata驱动的firadisk的软盘映像，谁有请给一个。
（想map a盘sata b盘firadisk装2003不行，a、b同时要mapfiradisk）

作者: caoshilian 时间: 2015-2-24 17:58
本帖最后由 caoshilian 于 2015-2-24 18:00 编辑

我做的一个合盘，txtsetup.oem如下：

[Disks]
disk1 = "AMD AHCI Controller Driver Diskette", amd_sata.inf, \
disk2 = "VBOOT DISK (SCSI) WinXP/32-bit",\disk1,\i386
disk3 = "VBOOT DISK (SCSI) WinXP/64-bit",\disk1,\amd64
disk4 ="FiraDisk Installation Disk",\firadisk.inf,\

[Defaults]
SCSI = oem

[scsi]
oem = "AMD AHCI Controller"
WNET32 = "VMLite VBoot SCSI Disk Device 32-bit"
WNET64 = "VMLite VBoot SCSI Disk Device 64-bit"
firadiskx86="FiraDisk Driver x86"
firadiskx64="FiraDisk Driver x64"

[Files.SCSI.oem]
inf = disk1, amd_sata.inf
catalog = disk1, amd_sata.cat
driver = disk1, amd_sata.sys, amd_sata
driver = disk1, amd_xata.sys, amd_xata

[Files.scsi.WNET32]
driver = disk2, vbootmp.sys, vbootmp
dll = disk2, vbootfs.sys
inf = disk2, vbootmp.inf
catalog= disk2, vbootmp.cat

[Files.scsi.WNET64]
driver = disk3, vbootmp.sys, vbootmp
dll = disk3, vbootfs.sys
inf = disk3, vbootmp.inf
catalog= disk3, vbootmp.cat

[Files.scsi.firadiskx86]
driver=disk4,firadisk.sys,FiraDisk
inf=disk4,firadisk.inf
catalog=disk4,firadisk.cat

[Files.scsi.firadiskx64]
driver=disk4,firadi64.sys,FiraDisk
inf=disk4,firadisk.inf
catalog=disk4,firadi64.cat

[HardwareIds.SCSI.oem]
id = "PCI\VEN_1002&DEV_4391&CC_0106", "amd_sata"
id = "PCI\VEN_1002&DEV_4394&CC_0106", "amd_sata"
id = "PCI\VEN_1022&DEV_7801&CC_0106", "amd_sata"
id = "PCI\VEN_1022&DEV_7804&CC_0106", "amd_sata"

[HardwareIds.scsi.WNET32]
id = "{CE758D4C-A341-4dd1-A328-EF6D65BDED5C}\VBootHba", "vbootmp"

[HardwareIds.scsi.WNET64]
id = "{CE758D4C-A341-4dd1-A328-EF6D65BDED5C}\VBootHba", "vbootmp"

[HardwareIds.scsi.firadiskx86]
id="detected\firadisk","FiraDisk"

[HardwareIds.scsi.firadiskx64]
id="detected\firadisk","FiraDisk"

[Config.amd_sata]
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,oem,REG_DWORD,1
value = Parameters\Device,AmdSataShutdown,REG_DWORD,0

[Config.amd_xata]
value = Parameters\Device,oem,REG_DWORD,1

[Config.vbootmp]
value = "", ErrorControl, REG_DWORD, 1
;value = "", Group, REG_SZ, "SCSI Miniport"
value = "", Start, REG_DWORD, 0
value = "", Type, REG_DWORD, 1

value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters,BusType,REG_DWORD,15
value = Parameters\Device,DriverParameter,REG_SZ,"\Device\HarddiskVolume1\xp.vhd"

[Config.FiraDisk]

作者: 2012rospartner 时间: 2015-2-24 20:44
可以把a盘map为firadisk,F6的时候选择firadisk,b盘map为sata驱动的img文件，那样会自动加载b软驱的sata驱动。同时a软驱是手动指定的firadisk驱动也已经被加载。

欢迎光临无忧启动论坛 (http://wuyou.net/)