无忧启动论坛

标题: Using 0PE 2017-03-06 as base for English Native XPPE [打印本页]
作者: maanu    时间: 2017-4-1 23:21
标题: Using 0PE 2017-03-06 as base for English Native XPPE
Hello Pseudo ,

first of all , i was able to get account on baidu , and downloaded your latest 0pe , it has really improved over the time , since i last used it in early 2012.  thank you for it.

secondly ,  i am trying use my English Native XPPE ( which you and hotdll helped me make back in 2011) as main PE  using 0PE as base. here is what i am doing.

1- take English system32 files , make a WIM and replace with XP.WIM>SYSTEM32.WIM .

2- replace explorer.exe and regedit.exe in wxpelse.7z which was found in your SYSTEM32.WIM .

3- 0pe boots fine , and mount XP.WIM ,NET.WIM  , but it hangs after it loads my SYSTEM32.WIM , and it does not give any error. it seems it can not find shell .


The reason why i want to use your 0pe as base , as it is the only NT5 PE , which can load my lenovo Flex 4 laptop without blue screen.   i am attaching my PECMD.INI .


Thank you in advance.


Best Regards
Maanu from Pakistan

PECMD.zip

1.38 KB, 下载次数: 28, 下载积分: 无忧币 -2

作者: 红毛樱木    时间: 2017-4-1 23:54
TEAM FIND Explorer.EXE,!SHEL %WinDir%\EXPLORER.EXE|WAIT 1669---->>SHEL %WinDir%\EXPLORER.EXE
作者: 邪恶海盗    时间: 2017-4-2 00:05
congratulations,have you used FbintTool 1.7?
作者: maanu    时间: 2017-4-2 00:07
红毛樱木 发表于 2017-4-1 23:54
TEAM FIND Explorer.EXE,!SHEL %WinDir%\EXPLORER.EXE|WAIT 1669---->>SHEL %WinDir%\EXPLORER.EXE

thank you , i ll try with your suggestion .

but i guess , the reason may be , because chinese PE uses WXPE path and my native PE uses I386 , can it be the issue ?
作者: 红毛樱木    时间: 2017-4-2 00:32
native load xxxx
see here reg
作者: maanu    时间: 2017-4-2 00:37
邪恶海盗 发表于 2017-4-2 00:05
congratulations,have you used FbintTool 1.7?

hahaha thank you my friend .

no , i have not yet used v 1.7 , i have no real use for it as of now. i am happy with previous version.


on topic.

tried with SHELL %WinDir%\EXPLORER.EXE  suggestion , still hangs at same point . it is next screen after NATIVE MOUNT.

2017-04-01_213441.png (34.89 KB, 下载次数: 217)

2017-04-01_213441.png
作者: maanu    时间: 2017-4-2 00:41
本帖最后由 maanu 于 2017-4-2 00:45 编辑
红毛樱木 发表于 2017-4-2 00:32
native load xxxx
see here reg


hello , here is native files , that 0PE loads .

whereas my native.ini reads as

@echo off
scd \SRNP\nvpe.wim
if exist nvpe.wim mount nvpe.wim x:\i386
if exist x:\i386\system32\PECMD.EXE exit




0PEnative.zip

2.09 KB, 下载次数: 13, 下载积分: 无忧币 -2

作者: 红毛樱木    时间: 2017-4-2 00:44
maanu 发表于 2017-4-2 00:41
hello , here is native files , that 0PE loads .

英文不还好。我直接说中文了。
一级内核中有native.exe，注册表中指向native.exe加载的配置文件，把native.exe加载的配置文件贴上来看一下。
作者: 红毛樱木    时间: 2017-4-2 00:47
maanu 发表于 2017-4-2 00:41
hello , here is native files , that 0PE loads .

whereas my native.ini reads as

I see.
Here   HKLM\SYSTEM\SETUP\CmdLine
作者: maanu    时间: 2017-4-2 00:47
红毛樱木 发表于 2017-4-2 00:44
英文不还好。我直接说中文了。
一级内核中有native.exe，注册表中指向native.exe加载的配置文件，把nati ...

please see above post .i forgot to add attachment.
作者: 红毛樱木    时间: 2017-4-2 00:56
you should upload your pe.
作者: 红毛樱木    时间: 2017-4-2 00:58
本帖最后由 红毛樱木 于 2017-4-2 01:00 编辑

Try "LOAD FBWF" in native.ini
or in pecmd.ini
I can't see anything about fbwf
作者: maanu    时间: 2017-4-2 01:28
红毛樱木 发表于 2017-4-2 00:58
Try "LOAD FBWF" in native.ini
or in pecmd.ini
I can't see anything about fbwf

i am running fbwf via RUN1.CMD  (in PECMD.INI)

RUN1.CMD consist of

hiderun /w FBWFCache.cmd 4 64 50 %
hiderun.exe /w cmd.exe /c md \"%USERPROFILE%\\Local Settings\\Temp\
hiderun.exe /w cmd.exe /C hiderun.exe /w packuser.exe -o%SystemDrive% -y





fbwfcache.cmd

@echo off
%1=MinSize %2=Reserv %3=Size %4=Unit
:: MinSize - The minimum size cache
:: Reserv -  It is reserved under system
:: The rigid size
if "%4"=="MB" (
  set "Size=%3"
  goto _1
)
:: Calculation of the size
for /f "usebackq skip=1 tokens=3 delims=: " %%i in (`RamStatus.exe`) do set size=%%i
set /a size=%size%/1024
set /a "size=(%size%-%2)*%3/100"
if %size% lss %1 set size=%1

:_1
if 128 lss %size% set size=128
set /a "cachethreshold=(%size%+50)*1024*1024"
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v PagedPoolSize /t REG_DWORD /d %cachethreshold% /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FBWF" /v WinPECacheThreshold /t REG_DWORD /d %size% /f
hiderun /w net start fbwf


i ll upload my system32.wim .
作者: 红毛樱木    时间: 2017-4-2 01:34
maanu 发表于 2017-4-2 01:28
i am running fbwf via RUN1.CMD  (in PECMD.INI)

RUN1.CMD consist of

here Reg
hklm\system\setup\cmdline
作者: maanu    时间: 2017-4-2 01:49
标题: .
本帖最后由 maanu 于 2017-4-2 01:52 编辑
红毛樱木 发表于 2017-4-2 01:34
here Reg
hklm\system\setup\cmdline


here is my pe

http://pan.baidu.com/s/1kVofFD1

i am using NVPE.WIM as SYSTEM32.WIM with 0PE
作者: 红毛樱木    时间: 2017-4-2 01:51
hklm\system\setup\cmdline
这个注册表键值有改成i386吗？
只有明天下载研究了，在被窝里了
作者: maanu    时间: 2017-4-2 01:54
红毛樱木 发表于 2017-4-2 01:51
hklm\system\setup\cmdline
这个注册表键值有改成i386吗？
只有明天下载研究了，在被窝里了

it is

PECMD.EXE MAIN %SystemRoot%\SYSTEM32\PECMD.INI

in my english pe
作者: 红毛樱木    时间: 2017-4-2 01:59
maanu 发表于 2017-4-2 01:54
it is

PECMD.EXE MAIN %SystemRoot%\SYSTEM32\PECMD.INI

前面的I386和这里的system32有没有关系？不知道你的具体情况，猜的
作者: maanu    时间: 2017-4-2 02:10
红毛樱木 发表于 2017-4-2 01:59
前面的I386和这里的system32有没有关系？不知道你的具体情况，猜的

yes , my original pe has i386/system32  relation .
作者: pseudo    时间: 2017-4-2 17:13
本帖最后由 pseudo 于 2017-4-2 17:18 编辑

can you get into native shell without BSOD, seeing "You are now in Native shell..." ?
maybe all "i386" must be changed to "wxpe" in the config files of system32.wim, and it must be mounted to wxpe.
作者: maanu    时间: 2017-4-2 17:33
pseudo 发表于 2017-4-2 17:13
can you get into native shell without BSOD, seeing "You are now in Native shell..." ?
maybe all "i3 ...

yes i can get to the " You are now in Native shell "

what files need to changed from i386 to wxpe ?

please note , i am already using your SETUPREG.HI_ .

can you please download above english PE to see what is the issue . ?

it ll be big help.


Best Regards
Maanu
作者: 红毛樱木    时间: 2017-4-2 17:46
本帖最后由 红毛樱木 于 2017-4-2 17:52 编辑
maanu 发表于 2017-4-2 01:49
here is my pe

http://pan.baidu.com/s/1kVofFD1


I have download your pe, and run it in vmware,it works well.
I think the problem starts with pecmd.ini
作者: pseudo    时间: 2017-4-2 18:02
本帖最后由 pseudo 于 2017-4-2 18:17 编辑

maybe i386 has been hardcoded  in some registration files of the config folder , it must be changed to wxpe.
作者: maanu    时间: 2017-4-2 18:04
yes , my PE works ok on its own , i want to use it with 0PE base , but it does not work with 0PE ,  should i upload 0pe package for you with my english system32.wim for testing ?

thank you
作者: 红毛樱木    时间: 2017-4-2 18:27
maanu 发表于 2017-4-2 18:04
yes , my PE works ok on its own , i want to use it with 0PE base , but it does not work with 0PE ,   ...
  1. FBWF P20 L64 H128
  2. INIT IU,3000
  3. PATH %SystemDrive%\TEMP
  4. CALL $SHELL32.DLL,DllInstall,#1,U
  5. LOGS %CurDir%\PEMCD.LOG
  6. SHOW -1:-1
  7. TEAM ENVI W=%WinDir%|ENVI WS=%WinDir%\SYSTEM32|ENVI WSD=%WS%\Drivers|ENVI V0=HKLM\System\CurrentControlSet\Services
  8. ENVI V2=PECMD.EXE
  9. ENVI V3=SHELL32.DLL#
  10. //EXEC =!%WinDir%\SYSTEM32\RUN1.CMD
  11. PATH %USERPROFILE%\Local Settings\Temp        //invalid
  12. EXEC =%systemroot%\\packuser.exe -o%SystemDrive% -y
  13. //EXEC =!%WinDir%\SYSTEM32\IMDISK.CMD
  14. EXEC =rundll32.exe setupapi.dll,InstallHinfSection DefaultInstall 132 .\imdisk.inf
  15. EXEC =!%WinDir%\SYSTEM32\7ZSET.CMD                                
  16. REGI %V0%\USBHUB\ImagePath=%WSD%\USBHUB.SYS
  17. REGI %V0%\USBCCGP\ImagePath=%WSD%\USBCCGP.SYS
  18. REGI %V0%\USBEHCI\ImagePath=%WSD%\USBEHCI.SYS
  19. REGI %V0%\USBOHCI\ImagePath=%WSD%\USBOHCI.SYS
  20. REGI %V0%\USBSTOR\ImagePath=%WSD%\USBSTOR.SYS
  21. REGI %V0%\USBUHCI\ImagePath=%WSD%\USBUHCI.SYS
  22. REGI %V0%\HIDUSB\ImagePath=%WSD%\HIDUSB.SYS
  23. REGI %V0%\MOUCLASS\ImagePath=%WSD%\MOUCLASS.SYS
  24. REGI %V0%\MOUHID\ImagePath=%WSD%\MOUHID.SYS
  25. REGI %V0%\KBDCLASS\ImagePath=%WSD%\KBDCLASS.SYS
  26. REGI %V0%\KBDHID\ImagePath=%WSD%\KBDHID.SYS
  27. REGI %V0%\CDROM\ImagePath=%WSD%\CDROM.SYS

  29. //TEAM PATH %SystemDrive%\TEMP|INIT IU,3690|EXEC @PECMD.EXE CALL $SHELL32.DLL,DllInstall,#1,U
  30. //FORX !\SRNP\NVPE.WIM,KK,1,TEAM FDIR PN=%KK%|ENVI PNTV=%PN%\WALL\|envi pn=
  31. //%V1%随机换幅壁纸 F10,%V2%,exec =@setwp.exe %PNTV%,%V3%98
  32. //FIND MEM>128,HOTK #121,%V2% exec =@setwp.exe %PNTV%
  33. //exec =@setwp.exe %PNTV%
  34. //WALL %CurDir%\img.jpg
  35. CALL $%WinDir%\SYSTEM32\oleacc.dll,DllInstall,
  36. CALL $%WinDir%\SYSTEM32\oleaccrc.dll,DllInstall,
  37. CALL $oleacc.dll,DllInstall,
  38. CALL $oleaccrc.dll,DllInstall,
  39. RAMD ImDisk,L5,FAT,Y:,MAANU
  40. REGI HKCR\lnkfile\IsShortcut
  41. HOTK #112,NOTEPAD.EXE %WS%\HELP.TXT
  42. HOTK Alt + T,PECMD.EXE TEMP @Delete
  43. HOTK Alt + P,X:\I386\SYSTEM32\ppAppsgenPE
  44. HOTK Alt + #0x53,PECMD.EXE SHUT S
  45. HOTK Alt + R,PECMD.EXE SHUT R
  46. HOTK Alt + E,PECMD.EXE LOAD %windir%\system32\SS.ini
  47. //LOAD %CurDir%\ext.ini
  48. PATH Y:\SRNTOOLS
  49. FORX !\SRNP\COMN\TOOLS.WIM,TWIM,1,MOUN TWIM,Y:\SRNTOOLS,%TEMP%,1
  50. WAIT 500
  51. IFEX Y:\SRNTOOLS\LINKS.INI,! FORX \SRNP\COMN\TOOLS.WIM,TWIM,1,MOUN TWIM,Y:\SRNTOOLS,%TEMP%,1
  52. IFEX Y:\SRNTOOLS\LINKS.INI, LOAD Y:\SRNTOOLS\LINKS.INI
  53. //REGI HKCR\Drive\shell\ImDiskUnmount\=Unmount IMDISK Virtual Disc
  54. //REGI HKCR\Drive\shell\ImDiskUnmount\command\=rundll32.exe imdisk.cpl,RunDLL_RemoveDevice %L
  55. //REGI HKLM\SOFTWARE\Classes\Ultraiso\shell\ImDiskMountFile\=Mount With IMDISK
  56. //REGI HKLM\SOFTWARE\Classes\Ultraiso\shell\ImDiskMountFile\command\=rundll32.exe imdisk.cpl,RunDLL_MountFile %L
  57. //REGI HKLM\SOFTWARE\Classes\Winimage\shell\ImDiskMountFile\=Mount With IMDISK
  58. //REGI HKLM\SOFTWARE\Classes\Winimage\shell\ImDiskMountFile\command\=rundll32.exe imdisk.cpl,RunDLL_MountFile %L
  59. //FIND MEM<250,CALL ASK
  60. //_SUB PAGEFILE_SET  
  61. //BROW Tag,*D:\,Select the partition to create PAGEFILE on
  62. //FIND $%TAG%=,ENVI DRIVE=D:!FDRV DRIVE=%TAG%
  63. //text Creating PageFile%DRIVE%
  64. //PAGE %DRIVE%\SRNPE.sys 150 300
  65. //_END

  67. //_SUB ASK `Pagefile FOR SRNPE
  68. //forx \pagefile.sys,pagefile,0,file %pagefile%  `Pagefile is necessery for low systems....
  69. //mess 穣our System has less then 300MB RAM\n \nFor creating pagefile press YES @Pagefile for PE #YN *10000 $N
  70. //FIND $%YESNO%=YES,CALL PAGEFILE_SET
  71. //_END
  72. //TEAM FIND Explorer.EXE,!SHEL %WinDir%\EXPLORER.EXE|WAIT 1669
  73. WALL %CurDir%\img.jpg
  74. SHEL %WinDir%\EXPLORER.EXE
  75. LINK %Desktop%\F1(HELP),%CurDir%\HELP.TXT
  76. //SHOW -1:-1

  78. //TEAM WAIT 900|KILL SMSS.EXE|KILL WINLOGON.EXE
  79. //SEND #121
  80. //EXEC =!%WinDir%\SYSTEM32\ppAppsGenPE.exe
  81. //EXEC =!%WinDir%\SYSTEM32\RUN2.CMD
  82. LOGS
复制代码


you can test pecmd.ini.
作者: maanu    时间: 2017-4-2 18:29
pseudo 发表于 2017-4-2 18:02
maybe i386 has been hardcoded  in some registration files of the config folder , it must be changed  ...

i caught 3 instances of I386 in system32.wim>config>Software

and changed to wxpe .

HKEY_LOCAL_MACHINE\sss\Microsoft\Windows\CurrentVersion\Setup, Installation Sources, X:\WXPE\SYSTEM32\DRIVERS X:\WXPE\SYSTEM32 X:\WXPE\INF



X:\WXPE\SYSTEM32\DRIVERS
X:\WXPE\SYSTEM32
X:\WXPE\INF


but still it hangs after finishing native screen.
作者: maanu    时间: 2017-4-2 18:49
红毛樱木 发表于 2017-4-2 18:27
you can test pecmd.ini.

it failed . still hang at same point.
作者: 红毛樱木    时间: 2017-4-2 18:49
maanu 发表于 2017-4-2 18:29
i caught 3 instances of I386 in system32.wim>config>Software

and changed to wxpe .

去掉那些等待运行的命令，比如 exec =
的这些，问题在pecmd.ini里，那几个cmd可能有卡死的情况
作者: maanu    时间: 2017-4-2 18:52
红毛樱木 发表于 2017-4-2 18:49
去掉那些等待运行的命令，比如 exec =
的这些，问题在pecmd.ini里，那几个cmd可能有卡死的情况

yes , i tried with your pecmd.ini too , but it again failed.
作者: 红毛樱木    时间: 2017-4-2 19:01
maanu 发表于 2017-4-2 18:52
yes , i tried with your pecmd.ini too , but it again failed.
  1. FBWF P20 L64 H128
  2. INIT IU,3000
  3. PATH %SystemDrive%\TEMP

  5. TEAM ENVI W=%WinDir%|ENVI WS=%WinDir%\SYSTEM32|ENVI WSD=%WS%\Drivers|ENVI V0=HKLM\System\CurrentControlSet\Services
  6. ENVI V2=PECMD.EXE
  7. ENVI V3=SHELL32.DLL#                              
  8. REGI %V0%\USBHUB\ImagePath=%WSD%\USBHUB.SYS
  9. REGI %V0%\USBCCGP\ImagePath=%WSD%\USBCCGP.SYS
  10. REGI %V0%\USBEHCI\ImagePath=%WSD%\USBEHCI.SYS
  11. REGI %V0%\USBOHCI\ImagePath=%WSD%\USBOHCI.SYS
  12. REGI %V0%\USBSTOR\ImagePath=%WSD%\USBSTOR.SYS
  13. REGI %V0%\USBUHCI\ImagePath=%WSD%\USBUHCI.SYS
  14. REGI %V0%\HIDUSB\ImagePath=%WSD%\HIDUSB.SYS
  15. REGI %V0%\MOUCLASS\ImagePath=%WSD%\MOUCLASS.SYS
  16. REGI %V0%\MOUHID\ImagePath=%WSD%\MOUHID.SYS
  17. REGI %V0%\KBDCLASS\ImagePath=%WSD%\KBDCLASS.SYS
  18. REGI %V0%\KBDHID\ImagePath=%WSD%\KBDHID.SYS
  19. REGI %V0%\CDROM\ImagePath=%WSD%\CDROM.SYS

  21. WALL %CurDir%\img.jpg
  22. MESS Now Will Start explorer.exe
  23. SHEL %WinDir%\EXPLORER.EXE
  24. LINK %Desktop%\F1(HELP),%CurDir%\HELP.TXT

复制代码


test this one.
作者: maanu    时间: 2017-4-2 19:30
红毛樱木 发表于 2017-4-2 19:01
test this one.

again failed , wait, i am uploading 0pe test package with my system32.wim . may be you or Pseudo can test and fix.

作者: maanu    时间: 2017-4-2 20:10
hello ,

here is my modified 0PE iso image , with english system32.wim


http://pan.baidu.com/s/1dFpDVQL


if anyone can diagnose the issue. i ll be thankful .
作者: pseudo    时间: 2017-4-4 20:14
@maanu
Desktop appears


url:
https://pan.baidu.com/s/1eSf29GI
password:
5c4g
作者: maanu    时间: 2017-4-5 00:25
本帖最后由 maanu 于 2017-4-5 00:49 编辑
pseudo 发表于 2017-4-4 20:14
@maanu
Desktop appears


OH that's awesome . what files you had to change to appear it ?

thank you for taking time , i spent all evening to translate your pecmd.ini and other chinese cmd ini files .

edit : do you know why My computer icon is not appearing ? i also themed with TangoPe style , using old pebeautify script.



欢迎光临 无忧启动论坛 (http://wuyou.net/) Powered by Discuz! X3.3