无忧启动论坛

标题: 【已解决】请问，WIN10启动时，有时蓝屏，终止代码internal power error 是什么原因 [打印本页]

作者: jmjmbj 时间: 2023-3-24 22:22
标题: 【已解决】请问，WIN10启动时，有时蓝屏，终止代码internal power error 是什么原因
本帖最后由 jmjmbj 于 2023-3-26 07:42 编辑

   有一本本，系统是WIN10，启动时，有时蓝屏（关机断电后重新启动，10次至少有一次蓝屏），提示终止代码internal power error，这是什么原因引起的，如何排除啊
  补图如下：

作者: 邪恶海盗 时间: 2023-3-24 22:38
图呢???

0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0

作者: 123Sir 时间: 2023-3-24 23:18
最好提供下蓝屏截图

作者: caii 时间: 2023-3-24 23:18
没有dump文件没办法知道啊可能驱动肯能最近装的软件也可能硬盘问题

作者: jmjmbj 时间: 2023-3-25 06:12

邪恶海盗发表于 2023-3-24 22:38
图呢???

补图了，请问，这是叫蓝屏吧，或者叫“win10开机提示你的设备出现问题需要重启 ”

作者: jmjmbj 时间: 2023-3-25 06:41

caii 发表于 2023-3-24 23:18
没有dump文件没办法知道啊可能驱动肯能最近装的软件也可能硬盘问题

按百度上的提示，安装了dbg_x86_6.10.3.233.msi，打开了032423-8640-02.dmp这样的文件：下面是第一次提示

Microsoft (R) Windows Debugger Version 6.10.0003.233 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [K:\032423-8640-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.          *
* Use .symfix to have the debugger choose a symbol path.                *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 19041 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 19041.1.amd64fre.vb_release.191206-1406
Machine Name:
Kernel base = 0xfffff801`06c00000 PsLoadedModuleList = 0xfffff801`0782a2d0
Debug session time: Fri Mar 24 19:59:34.678 2023 (GMT+8)
System Uptime: 0 days 0:01:12.634
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
*                                                                            *
*                      Bugcheck Analysis                                  *
*                                                                            *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A0, {608, ffff998bafaf8040, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Unable to load image \SystemRoot\System32\drivers\dxgkrnl.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!KPRCB                                     ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!KPRCB                                     ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
Probably caused by : atikmdag.sys ( atikmdag+1ce93d )

Followup: MachineOwner
---------

作者: jmjmbj 时间: 2023-3-25 06:43
下面是第五次蓝屏提示（032423-8875-01.dmp这个文件）

Microsoft (R) Windows Debugger Version 6.10.0003.233 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [K:\032423-8875-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.          *
* Use .symfix to have the debugger choose a symbol path.                *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 19041 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 19041.1.amd64fre.vb_release.191206-1406
Machine Name:
Kernel base = 0xfffff804`37000000 PsLoadedModuleList = 0xfffff804`37c2a2d0
Debug session time: Fri Mar 24 21:51:12.689 2023 (GMT+8)
System Uptime: 0 days 0:46:59.633
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
...................
*******************************************************************************
*                                                                            *
*                      Bugcheck Analysis                                  *
*                                                                            *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A0, {608, ffffb60f1a8f7040, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Unable to load image \SystemRoot\System32\drivers\dxgkrnl.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!KPRCB                                     ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!KPRCB                                     ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*************************************************************************
***                                                                ***
***                                                                ***
*** Your debugger is not using the correct symbols                ***
***                                                                ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information.    ***
***                                                                ***
*** Certain .pdb files (such as the public OS symbols) do not    ***
*** contain the required information.  Contact the group that    ***
*** provided you with these symbols if you need this command to ***
*** work.                                                       ***
***                                                                ***
*** Type referenced: nt!_KPRCB                                  ***
***                                                                ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                *
* The Symbol Path can be set by:                                  *
* using the _NT_SYMBOL_PATH environment variable.                *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+                                  *
*********************************************************************
Probably caused by : atikmdag.sys ( atikmdag+1ce93d )

Followup: MachineOwner
---------

作者: jmjmbj 时间: 2023-3-25 06:45
本帖最后由 jmjmbj 于 2023-3-25 06:48 编辑

这五个后缀为dmp的文件

032423-8875-01.rar (710.33 KB, 下载次数: 0)

看最后一行是 Probably caused by : atikmdag.sys ( atikmdag+1ce93d )，百度搜索，说是 “ATI Radeon 系列的显卡驱动核心进程”引起的。

作者: swordliu 时间: 2023-3-25 06:49
多数为硬盘问题

作者: jmjmbj 时间: 2023-3-25 10:45
经在百度搜索了解，有网友以前也遇到此现象，是AMD显卡驱动引起的启动蓝屏。刚才用驱动精灵更新显卡驱动失败，又用360驱动大师更新显卡驱动显示成功，然后关机断电再开机，如此反复十多次，目前还未蓝屏。待进一步观察中。

作者: 115990111 时间: 2023-3-25 11:38
1024

作者: 深深的沼泽 时间: 2023-3-25 11:47
持续关注！

作者: 邪恶海盗 时间: 2023-3-25 14:48
最讨厌看这些臭长臭长的报告了(实际上是看不懂)...

你可以用NirSoft的一个小工具来定位蓝屏文件:
http://www.nirsoft.net/utils/blue_screen_view.html

作者: jmjmbj 时间: 2023-3-26 07:39
本帖最后由 jmjmbj 于 2023-3-26 07:41 编辑

邪恶海盗发表于 2023-3-25 14:48
最讨厌看这些臭长臭长的报告了(实际上是看不懂)...

你可以用NirSoft的一个小工具来定位蓝屏文件:

多谢您的指点！一开始以为可能是硬件问题，因为这是一个二手老本本，但想到原来的系统没有这现象，是我重做系统后才有蓝屏现象。经查蓝屏文件，发现是AMD显卡驱动问题。百度搜索发现，AMD显卡驱动不适合的话就会蓝屏，很多网友遇到这问题。现在用360驱动大师安了一个版本，关机断电重新启动20多次了，没蓝屏。问题应该解决了，老本本可以正常工作了，生产力电脑之一。老本三代I7，8G内存，480G固态硬盘，办公及网课足够，比老台式机快。

欢迎光临无忧启动论坛 (http://wuyou.net/)