无忧启动论坛

标题: 发个设置PE显示的小工具，只有8kb [打印本页]

作者: qinjg8008 时间: 2006-12-19 22:14
标题: 发个设置PE显示的小工具，只有8kb
如题

Snap1.jpg (12.65 KB, 下载次数: 59)

Disp.rar

5.04 KB, 下载次数: 113, 下载积分: 无忧币 -2

作者: l1982012800 时间: 2006-12-19 22:48
不错，经试验很好用，能不能将格式改成 Disp.exe t5 w800 h600 b32 f75,感觉容易理解

作者: zts59 时间: 2006-12-19 23:09
谢谢，收下了

楼主，能不能搞个用命令行设置虚拟内存（页面文件）的工具。
我怎么用AUTORAMRESIZER.EXE，用不起来呢。

作者: wanghh 时间: 2006-12-20 06:51
谢谢，收下了

作者: rock269 时间: 2006-12-20 08:11
小巧好用，谢谢了

作者: QJCM 时间: 2006-12-20 15:46
只下不顶,不好啊!

所以我顶!

作者: lxl1638 时间: 2006-12-20 17:08
棒大师，我也来一个，大师的小而精，我这个大而强。
参数较多，自由度大，前面的三组参数(每对[]这一组)可以单独使用，各组参数的顺序可以乱来，带 NoTray 参数运行不驻留托盘，定义了一个系统级热键，任何情况下按这个热键都会设置成800*600*16*75，以防不正确的设置引起黑屏时使用。

[ 本帖最后由 lxl1638 于 2006-12-20 05:16 PM 编辑 ]

未命名.PNG (4.41 KB, 下载次数: 55)

SETDISPLAY.RAR

37.01 KB, 下载次数: 59, 下载积分: 无忧币 -2

作者: zhfzl2006 时间: 2006-12-20 18:50
谢谢了,顶一下

作者: qinjg8008 时间: 2006-12-20 21:13

原帖由 zts59 于 2006-12-19 11:09 PM 发表
谢谢，收下了

楼主，能不能搞个用命令行设置虚拟内存（页面文件）的工具。
我怎么用AUTORAMRESIZER.EXE，用不起来呢。

直接使用SetPageFile.exe 即可

SetPageFile {/a<TimeoutOption>}
         {/f<PageFileName>}
         {/t<Timeout}
         {/i<MinimumSize>}
         {/m<MaximumSize>}
         <FileName>
         <MinimumPageFileSize>
         {<MaximumPageFileSize>}

If no parameters are specified or the only parameters specified are the option type parameters starting with / then a dialog is presented allowing the page file drive and size to be selected. The option type parameters are only for controlling the behavior of the dialog.

The /a<TimeoutOption> option parameter species what happens when the timeout with the value specified by the /t option parameter triggers. If /a0 is specified then on the timeout the dialog is cancelled and no pagefile is created. If /a1 is specified then a page file will be created on the first drive in the dialog with the minimum size specified by the /i option parameter and the maximum size specified by the /m option parameter. If no /m option parameter is specified then the maximum size will be the same as the minimum size.

The /f<PageFileName> option parameter allows the name of the page file to be changed from the default pagefile.sys when the dialog is used to select the page file drive.

The /t<Timeout> option parameter specifies the timeout period in milliseconds after which the dialog is dismissed. Note that if a drive selection change is made in the list box or if focus is given to one of the size text boxes then the timer is cancelled.

The /i<MinimumSize> option parameter specifies the minimum size in megabytes of the page file that is created if chosen from the dialog and no size is entered in the minimum size textbox in the dialog. This is the value that will be used for the pagefile minimum size if the dialog times out.

The /i<MaximumSize> option parameter specifies the maximum size in megabytes of the page file that is created if chosen from the dialog and no size is entered in the maximum size textbox in the dialog. This is the value that will be used for the pagefile maximum size if the dialog times out.

The remaining three parameters are only used when the drive selection dialog is not used.

The <FileName> parameter must be a full path to the page file like c:\pagefile.sys

The <MinimumPageFileSize> parameter specifies the minimum page size in megabytes.

The optional <MaximumPageFileSize> parameter specifies the maximum page size in megabytes. If the parameter is not specified then the maximum size is set to be the same as the minimum size.

Example usage:
SetPageFile c:\pagefile.sys 512

This creates a page file named c:\pagefile.sys of size 512 megabyte

SetPageFile /t30000 /a1 /i512

This shows the dialog for 30 seconds and will create a 512 megabyte pagefile named pagefile.sys on the first drive shown in the dialog if the dialog times out.

作者: zts59 时间: 2006-12-21 08:24
哦，谢谢
知道了，原来文件名要带上盘符的。

欢迎光临无忧启动论坛 (http://wuyou.net/)