请教怎样编辑autoexec.bat和config.sys两个文件...

学着点

:o看你经常说....编辑autoexec.bat和config.sys两个文件...
偶想问一下...
这两个文件要怎么进入...
偶在windows下打开是一片空白..........................
真是让偶摸不透啊...............................
是不是要在纯dos下啊..
还是需要什么特别的软件...........................................
那位高手能告诉偶一下..................................................................:L:L:L:L


原标题：

请教高手啊..................

请注意不要用不能说明问题的标题，再发现直接删除，请学习版规。

[ 本帖最后由 打狗协会理事 于 2006-10-12 09:32 PM 编辑 ]

bdfcy

XP 系统根目录下的这两个文件本来就是空的呀！

老毛桃

而且，还可以删除，除了 ntldr、ntdetect.com、boot.ini、bootfont.bin 之外的文件都可以删除，当然 pagefile.sys 你是删不掉的

bdfcy

不过当你在系统中运行 16 位 DOS 程序的时候又会生成！

bclz

原帖由 老毛桃 于 2006-10-10 09:01 PM 发表
而且，还可以删除，除了 ntldr、ntdetect.com、boot.ini、bootfont.bin 之外的文件都可以删除，当然 pagefile.sys 你是删不掉的

pagefile.sys 我比较喜欢删他。。嘿嘿

lianjiang

基本上一般是在运行DOS环境时autoexec.bat和config.sys两个文件才有实际意义。象一些急救盘，工具盘，一键恢复ghost等。

学着点

有没有搞错..各位高手...偶是想知道怎么改XP和2K的AUTOEXEC.BAT和CONFIG.SYS.............你们是不是有点牛头不对马嘴啊............................郁闷啊...................和进入改啊..

lianjiang

原帖由 学着点 于 2006-10-11 04:58 PM 发表
有没有搞错..各位高手...偶是想知道怎么改XP和2K的AUTOEXEC.BAT和CONFIG.SYS.............你们是不是有点牛头不对马嘴啊............................郁闷啊...................和进入改啊..

XP和2K不需要AUTOEXEC.BAT和CONFIG.SYS，还要改啥？

老毛桃

原帖由 学着点 于 2006-10-11 16:58 发表
有没有搞错..各位高手...偶是想知道怎么改XP和2K的AUTOEXEC.BAT和CONFIG.SYS.............你们是不是有点牛头不对马嘴啊............................郁闷啊...................和进入改啊..

默认情况下，Windows 2000/XP 的启动 对于 Autoexec.bat 和 Config.sy 不予理会

学着点

明白了...........................3Q..各位高手..........................

zhangdingze

人家问的是如何编辑这两个文件，而你们却所答非所问。其实只需用记事本打开即可编辑：对于autoexec.bat，右击此文件图标→编辑；对于config.sys，右击此文件图标→用记事本打开。OK。

clear

開始→執行 →cmd  進入dos 選 ait+enter 進到c:\ 打edit 編輯

或copy con config.sys  新建立
xxxxxx
xxxxxxx
打完按一下ctrl +z 存檔

題外話

pagefile.sys    ← 刪的掉
方法  
attrib -r -a -s -h c:\ pagefile.sys     改掉鼠性
dle  pagefile.sys 就刪了
這是系統保留的記憶體 從電腦中可以設定 刪了 下次會自動回復
吃飽太閒 沒事刪它做什？ @@

cxzcvbnm

原帖由 zhangdingze 于 2006-10-13 21:52 发表
人家问的是如何编辑这两个文件，而你们却所答非所问。其实只需用记事本打开即可编辑：对于autoexec.bat，右击此文件图标→编辑；对于config.sys，右击此文件图标→用记事本打开。OK。

同感...............

wanggy

Autoexec.bat 和 Config.sy
DOS时代的产物
windows上基本上没用
编辑这两个文件倒是简单，
记事本啥的都可以打开

重要的是要知道里面该写些什么东西
例：autoexec.bat
@ECHO OFF
KPUSH 27 27
KPUSH>NUL
REM Made by Wengier. China DOS Union.
REM All rights reserved. 2002-2003.
TM /F
LH KILLER
LH DOSKEY
LH CTMOUSE
::Note: The following line is for the compatibility on some systems:
LH CTMOUSE>NUL
IF %CONFIG%#==M6# GOTO SHUT
IF NOT %CONFIG%#==M5# GOTO BOOT
ECHO.
ECHO Now preparing to open README with Chinese support...
XMSDSK 80 /Y>NUL
FINDRAMD>NUL
IF %RAMDRIVE%#==# ECHO Can't create RAM disk!
IF %RAMDRIVE%#==# GOTO SHUT
EXTRACT /E /L %RAMDRIVE%\ DOSET.CAB EDIT.COM>NUL
XZL
%RAMDRIVE%\EDIT README.TXT
CLS
XZL /Q
:SHUT
CLS
WBAT BOX "Please enter your choice:",Shutdown the computer,Restart the computer
IF NOT ERRORLEVEL 3 GOTO ANS
WBAT BOX (RED ON YELLOW) "Note: Please make a choice!",OK
GOTO SHUT
:ANS
IF ERRORLEVEL 2 GOTO RES
ECHO Now trying to shutdown the computer..
ECHO.
SHUTDOWN S
ECHO.
ECHO Shutdown failed. Your computer may not have an ATX power.
:RES
ECHO Now restart the computer..
ECHO.
SHUTDOWN R
GOTO END
:BOOT
SET SM=
DREADY C:
IF ERRORLEVEL 1 ECHO Warning: Can't find any valid hard drives!
IF ERRORLEVEL 1 GOTO NOHD
ECHO Y|LOCK C:>NUL
ECHO.
ECHO Now trying to load the hard disk cache to speed the drives up...
WBAT BOX "Please choose the hard disk cache you like in 5 seconds:",PC-CACHE,SMARTDRV,Cancel #1,5
IF ERRORLEVEL 3 ECHO Cancelled.
IF NOT ERRORLEVEL 2 LH PCCACHE /SIZEXT:4096 /WRITE:OFF /WIN /MINI
IF ERRORLEVEL 2 IF NOT ERRORLEVEL 3 SET SM=Y
:NOHD
ECHO.
LH MSCDEX /D:IDE-CD /D:SCSI-CD /D:USB-CD /S /K
XMSDSK 4096 /Y
ECHO Setting up the RAM disk...
FINDRAMD>NUL
IF %RAMDRIVE%#==# GOTO NORAM
IF NOT EXIST %RAMDRIVE%\SYSTEM\NUL MD %RAMDRIVE%\SYSTEM
COPY COMMAND.COM %RAMDRIVE%\SYSTEM>NUL
EXTRACT /E /L %RAMDRIVE%\SYSTEM DOSET.CAB>NUL
EXTRACT /E /L %RAMDRIVE%\SYSTEM VC.CAB>NUL
ECHO The necessary tools have been successfully loaded to drive %RAMDRIVE%.
MD %RAMDRIVE%\TEMP
SET COMSPEC=%RAMDRIVE%\SYSTEM\COMMAND.COM
SET TMP=%RAMDRIVE%\TEMP
SET TEMP=%RAMDRIVE%\TEMP
PATH=%RAMDRIVE%.;%RAMDRIVE%\SYSTEM
IF %SM%#==Y# LH SMARTDRV 4096 2048 /X
GOTO NEXT
:NORAM
ECHO Warning: Can't create RAM disk!
IF %SM%#==Y# ECHO          Can't load SMARTDRV!
SET COMSPEC=A:\COMMAND.COM
:NEXT
SET SM=
SET DIRCMD=/OGN /4
SET PROMPT=$P$G
PATH=%PATH%;C:.;A:.;..
LH SHARE
LH ZENO /Q
LH MOUSCLIP /M
LH DOSLFN /C- /Z:CP936UNI.TBL
IF %CONFIG%#==M3# IF %RAMDRIVE%#==# ECHO Warning: Can't load NTFS drives support!
IF %CONFIG%#==M4# IF %RAMDRIVE%#==# ECHO Warning: Can't load NTFS drives support!
IF %CONFIG%#==M3# IF NOT %RAMDRIVE%#==# NTFSDOS /U
IF %CONFIG%#==M4# IF NOT %RAMDRIVE%#==# NTFSDOS /U
LH ESCAPE
FINDCD /Q
CLS
WRITEXT 1 1 -f15 Note:
ECHO.
IF NOT %CDROM%#==# ECHO For accessing CD/DVD drive, use the drive letter %CDROM%(1st).
IF NOT %RAMDRIVE%#==# ECHO For accessing RAM drive, use the drive letter %RAMDRIVE%.
IF NOT %CONFIG%#==M3# IF NOT %CONFIG%#==M4# ECHO For accessing NTFS drives(if any), type NTFSDOS at the command line.
ECHO At any time, you can press F12 key to return to DOS, or use the mouse.
BREAK ON
LFNFOR ON
IF %RAMDRIVE%#==# GOTO END
ECHO.
ECHO Press ENTER in 2 seconds if you want to start Volkov Commander..
WAIT 2
SET VC=
IF ERRORLEVEL 13 IF NOT ERRORLEVEL 14 SET VC=1
IF %VC%#==# ECHO Skipped.
ECHO.
ECHO Now you're in MS-DOS 7.10 prompt. [Made by Wengier, China DOS Union]
ECHO.
ECHO For more information, please look at README.TXT (in Chinese).
ECHO To start Chinese system for Chinese, type XZL at the command line.
WRITEXT 0+ 1 "Any comments, please come to the forum at: " -f15 http://dosbbs.2ya.com/ -f7
ECHO.
IF %VC%#==# GOTO END
SET VC=
ECHO.
ECHO Starting Volkov Commander...
ECHO.
SET DIF=
STRINGS UMB=UMBLARGE >NUL
STRINGS DIF=SUB %UMB%,30720 >NUL
SET UMB=
IF NOT %DIF%#==# GOTO LH
VC
GOTO END
:LH
SET DIF=
LH VC
:END
ECHO.

==================
例：
CONFIG.SYS[MENU]
MENUITEM=M1,Boot with EMM386(NOEMS) [Protected Mode]
MENUITEM=M2,Boot with UMBPCI [Real Mode]
MENUITEM=M3,Boot with EMM386(NOEMS), NTFS and USB drives support(if any)
MENUITEM=M4,Boot with UMBPCI, NTFS and USB drives support(if any)
MENUITEM=M5,View the README file only(with Chinese support)
MENUITEM=M6,Shutdown or restart the computer
MENUDEFAULT=M1,15
[M1]
DEVICE=ECHO.SYS L/o/a/d/i/n/g CONFIG.SYS /w/i/t/h EMM386...
DEVICE=HIMEM.SYS
DEVICE=EMM386.EXE NOEMS X=D000
INCLUDE CD
[M2]
DEVICE=ECHO.SYS L/o/a/d/i/n/g CONFIG.SYS /w/i/t/h UMBPCI...
DEVICE=ECHO.SYS
DEVICE=UMBPCI.SYS
DEVICE=LOWDMA.SYS
DEVICE=HIRAM.EXE
DEVICEHIGH=HIMEM.SYS
INCLUDE CD
[M3]
INCLUDE M1
INCLUDE USB
[M4]
INCLUDE M2
INCLUDE USB
[M5]
DEVICE=ECHO.SYS Y/o/u /h/a/v/e /c/h/o/s/e/n /t/o /v/i/e/w README /o/n/l/y.
INCLUDE M6
[M6]
DEVICE=ECHO.SYS P/l/e/a/s/e /w/a/i/t...
DEVICE=HIMEM.SYS
[USB]
DEVICE=ECHO.SYS
DEVICE=ECHO.SYS L/o/a/d/i/n/g USB /d/r/i/v/e/s /s/u/p/p/o/r/t...
DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD OBAR=0xD000
DEVICE=USBASPI.SYS /R
DEVICEHIGH=DI1000DD.SYS
DEVICEHIGH=USBCD.SYS /D:USB-CD
DEVICE=ASPIOHCI.SYS /INT /ALL
DEVICE=ASPIUHCI.SYS /INT /ALL
[CD]
DEVICEHIGH=VIDE-CDD.SYS /D:IDE-CD
DEVICEHIGH=ASPICD.SYS /D:SCSI-CD
DEVICEHIGH=CLOAKING.EXE
[COMMON]
SHELL=A:\COMMAND.COM /P /E:640
SET TMP=C:\
SET TEMP=C:\
DOS=HIGH,UMB,AUTO
NUMLOCK=OFF
FCBSHIGH=4,0
FILESHIGH=30
BUFFERSHIGH=30,0
LASTDRIVEHIGH=32
STACKSHIGH=9,256
COMMENT Made by Wengier. China DOS Union.
COMMENT All rights reserved. 2002-2003.

[ 本帖最后由 wanggy 于 2010-1-13 23:27 编辑 ]

20114434

pagefile.sys谁说不可以删除的只要在选择我的电脑→属性→高级→性能选项→高级→虚拟内存→选择无分页文件在点击设置重新启动就没有了