 |
|
fish2006 发表于 2013-12-20 18:30 这是google自动翻译的结果： Indexer driver packages is - well, yes, for indexing drayverpakov. Use drayverpakov provided for three operating systems: Windows XP (x86) - folder NT5x86, W7 (x32) - NT6x32 and W7 (x64) - NT6x64. Indexer to work you need to connect a software package 2k10. Can be indexed from any assembly 2k10 or under conventional windsurfing with connected p.paketom (P2Start.exe). Necessary files and 7z.exe InfToReg.exe If you run the batch file with the key index will be performed only: 1 - Driver Package for Windows XP (x86) folder NT5x86 2 - driver package for Windows 7 (x32) folder NT6x32 3 - Driver Package for Windows 7 (x64) folder NT6x64 7 - driver package for Windows 7 (x32/x64) in folders NT6x32/NT6x64 9 - indexing of all package NT5x86/NT6x32/NT5x86 ================================================== ========================== Installing the drivers using DevInst possible in all operating systems, as PE- systems and conventional "desktop" OS. For an unattended installation Driver is a batch file AutoInst.bat. Do not forget that when you install drivers drayverpakov relevant archives will be unpacked in the% TEMP% ie, require a lot of space to unpack. Try not to use large archives, break them into small - it will speed installation and reduce requirements for free space (remember that PE assemblies 2k10 folder% TEMP% is on the disk in the memory in: \, i.e., its size depends on the amount of RAM). To start a silent installation of the drivers at the start of the PE system can be prescribed in the relevant performance AutoInst.bat batch file (SVPE.bat, RLPE.bat, W7PE.bat, WS64.bat). To disable the automatic installation of drivers RusLive easiest to remove or rename the folder PeDrivers, for example, in PeDrivers.Not. You can also change install the drivers through zPnP (DEFAULT) on the installation using DevInst. For You need to unpack Wim-Driver Files from PeDrivers and pack them with using 7zip. PeDrivers folder to delete, and put in a packed drayverpaki NT5x86 and index. Installer to automatically register its call RLPE.bat, manual start - use AutoInst.bat |
2012doberman 发表于 2013-12-20 17:23 首先谢谢 2012doberman 这么快地有回复，文件已下载，看着舒服多了。另外，INDEX_DP.TXT 文件是不是说明性文件，如果是，能否再麻烦你给以翻译后上传。 |
2012doberman 发表于 2013-12-20 17:28 Thanks doberman. DevInst.exe seems have good mechanism to search and install drivers. But in my Win8.1 x86 Ram OS, it cannot find and install vedio driver with "auto2" (but can install wireless driver), after boot, manually run devinst.exe. it can find the vedio driver and marked correctly, when chick "install", it can install. Strange. So I guess maybe the "auto2" limited it not to find vedio card? |
| InftoReg |
InfReg.jpg (385.69 KB, 下载次数: 37)
本帖最后由 2012doberman 于 2013-12-20 17:31 编辑 sp_star 发表于 2013-12-20 16:53 DevInst.exe auto2 - Automatic installation (if the driver is installed, then skip). DevInst.exe - Manual installation, you can select the correct driver. For x64 - Mandatory inclusion of "Test Mode" in the BCD! Drivers Video, specially optimized for Win7, Win8, Win8.1 |
fish2006 发表于 2013-12-20 15:46 INDEX_DP.CMD - English http://pan.baidu.com/s/1i3qPAtB |
|
按这个理解，成功添加了一个驱动。 VIDEO~04.TXT是描叙VIDEO~04.7z这个驱动包的，里面列出了支持的设备。 例如： PCI\VEN_8086&DEV_0046,(PE) Intel(R) 1st Generation Intel HD Graphics,IG815102476_NT6x32\igdlh.inf,08/09/2011 v8.15.10.2476 PCI\VEN_8086&DEV_0046: 设备ID，应该是根据这个决定是否提取驱动。 (PE) Intel(R) 1st Generation Intel HD Graphics： 可能不重要，设备的名字。最好和inf文件一致，但(PE)不知道是什么意思。 IG815102476_NT6x32\igdlh.inf: 压缩包里inf文件的路径和名字。 08/09/2011 v8.15.10.2476: 版本，和inf文件里保持一致。 但DevInst.exe auto2只是安装了我的无线网卡驱动，没有安装显卡驱动。进入系统，再运行DevInst.exe，是可以找到并安装显卡驱动的。 不知道DevInst.exe都有些什么参数，也没有找到介绍。 |
| 能否加上支持触摸屏功能。谢谢，很需要。 |
fish2006 发表于 2013-12-19 19:15 INDEX_DP.TXT INDEX_DP.CMD Need to translate into China! |
tulongwa 发表于 2013-12-19 06:49 驱动是俄文版本身带的，我没有做过分析和研究，没有任何经验可言。 2012doberman 俄罗斯网友根据大家的要求，后来打包上传 X86+X64 驱动程序，如果这是他亲手自作的，则应该对此最有发言权，最好请他写个教程是上策。另外，还有如何手工添加驱动这些问题都没有引起讨论，如果有些高手们肯出手，这些还是能解决的，我没有能力，只能做伸手党。 |
| “欢迎排砖，也允许仍鞋”,谢谢楼主分享，不过有俩错别字~~~~~~~~~ |
| 我想在这个pe中加入自己的无线网卡驱动，驱动已经提取了应该如何打包进去，我看里面有好些txt文件，不知道怎么编辑啊，还望楼主出一个修改pe本身驱动包的教程，因为我用水老的winpe就能驱动正常，如果能替换一下也可以，但是我在驱动包内没找到D-link的文件夹，就如果只是放进去是不管用的，那些txt文件又看不懂，不知道这些驱动是用什么工具打包的？ |
|
报告一下实机测试（USB-ZIP + V2写入U盘)smExcel 2010运行正常。 但同样存在一问题：启动后桌面会不出现外置工具图标，疑是没能识别U盘有关，重新拨插一下U盘就OK了。 这一问题，有不少人提出过，好像与U盘类型有关，我用USB3.0的U盘制作启动U盘在不支持USB3.0的电脑中就会有此问题的。 |
| 非常不错，支持楼主更新，集成的工具都很实用，不过好像桌面的smExcel 2010无法运行，提示重要文件丢失，也许是虚拟机测试内存不足造成的，待实机测试证实。 |
|
谢了 真心感谢 |
Powered by Discuz! X3.3
© 2001-2017 Comsenz Inc.
组图打开中，请稍候......
收藏
支持
反对
