NativePE Mount failed 0xC0000034

maanu

hello my chinese friends,

i have been trying to make a English Native PE with the help of hotdll , pseudo and other chinese friends,first i was having some problems of Blue screen , and the native shell was not even started ,

now after modifying few things in SETUPREG.HIV , i have solved it  , and now i can lead to native shell.

but the problem is , no matter what i do , i can not mount the second kernel successfully . it always give error  code 0xC0000034 mount failed.  

pseudo advised me to go through command line , but it always give same error ,  

after reading hotdll problem

http://bbs.wuyou.net/forum.php?m ... mp;highlight=NATIVE

i again checked , and all my files are defrag with wincontig  , and i have 2 MB space free on Native kernel to mount , as hotdll said .

i use following native.cfg

@echo off
echo Search secondary kernel of WinPe from C: to Z: ...
scd \I586\NVPE.WIM
mount NVPE.WIM X:\I386



here are screen shots ,


any help of expert , i will be very much thankful .


Regards,
Maanu from Pakistan

hotdll

scd \I586\NVPE.WIM
if exist NVPE.WIM mount NVPE.WIM X:\I386

hotdll

are you  use grub4dos  and map ISO  >> d: ?

maanu

also , i feel one issue , under Native Command prompt , i was not able to use  " \ "

example  X:\I386  (which NOT work under native cmd prompt)

\ ,  does not work in Native shell command line , only / works .

example

X:/I386

can this also be problem ?

hotdll

原帖由 maanu 于 2011-11-18 22:08 发表
also , i feel one issue , under Native Command prompt , i was not able to use  " \ "

example  X:\I386  (which NOT work under native cmd prompt)

\ ,  does not work in Native shell command l ...

windows Do not use /, and use of \

maanu

success

i was able to mount it using your code hotdll on post 2 .


scd \I586\NVPE.WIM
if exist NVPE.WIM mount NVPE.WIM X:\I386
if exist x:\wxpe\system32\PECMD.EXE exit


first i was not using grub4dos to map iso , now i used grub4dos , and success.

is it OK and success ?

moreover , when i click on EXIT , it gives BSOD

dont know how to check if it was successful .

maanu

hotdll

can we use post # 65 method in current  problem ?

http://bbs.wuyou.net/forum.php?m ... ATIVE&page=7###

problem is , when i tried your Native XPE , from command line , it mount Success  NVPE.WIM  on both X:\wxpe  and C:\ (for testing ) ,

but i use same your files and everything on my english pe , but it always give Mount failed 0xc000000034

all my files are defragment with WINCONTIG.

hotdll

The first piece of graph shows no find NVPE. WIM

maanu

even if i manually go with command line , and browse to the wim file , and try to mount it to any directory , it gives me the same 0xc000034 error ,

but it s not happened with your release . i can mount your nvpe.wim to any directory from your release .

as you can see , i can see SRN.WIM at F: directory (my cd rom iso) , but it still giving me error .

should i upload my iso for your testing ?

幸运的草

mount srn.wim f:\sss 时，f:\ 必须要有\sss目录，否则:mount failed 0xc0000034.
If there is not f:\sss,mountfailed 0xc0000034.

[ 本帖最后由 幸运的草 于 2011-11-19 18:29 编辑 ]

hotdll

Mount goal path can't for root directory and Target path must exist !

example
if exist NVPE.WIM mount NVPE.WIM X:\I386  
There will be found x: \ i386

error example
if exist NVPE.WIM mount NVPE.WIM X:\

maanu

I tried with your NativeXPE ,

mount nvpe.WIM C:

mount success .

anyways , i am upload my Native PE package , can you please correct its errors ? i am sure you will make it work with your magic .
and see where i am doing wrong .

http://115.com/file/dn8lfltj

, because when i mount my SRN.WIM from your NativeXP  core (NVPE.IM_) , it is always Mount success . so i guess problem is in my NVPE.IMG (14MB ) file .

thank you in advance.

maanu

hotdll

brother , have you download success the above file ?

hotdll

I have checked your srn7. Iso
X: zoning do not write!

Don't know what causes

natvie shell mode
md x:\petools
failed !

pseudo

It seems you have not load WIMFLTR.SYS in txtsetup.sif.

chiannet

用我修改的注册表和CFG文件可成功挂载二级内核。

但你的PE离实用还需大力修改。

maanu

@ pseudo

with great help of you , i was able to sort this porblem , your guess was right , it was WIMFLT.SYS which was not present in SCSI.LOAD in txtsetup.sif

when i added , it was successful and mount .  

now my english PE is working quite fine , with native method.

i have 2 questions for every one.

1-  why we use .IMG file for native part loading (3MB or so ) , why can not we use .WIM file ?

2-  if i integrate SRS drivers into my PE , my Drivers folder will raise to aabout 25MB  , is it possible that we divide Drivers Loading also in 2 parts ? , means the big sata drivers can still be copied to .WIM part of loading to save loading time . ???

thank you so much HOTDLL and Chiannet  , you are so nice

Regards,
Maanu from Pakistan

hotdll

You can use GRUB4DOS based on the F6IMG external drive.
Level 1 the kernel may, in accordance with the level of PE I DIY kernel list downsizing.

zds1210

楼主是外国人啊？怎么全用英语？

felix1031

Maanu from Pakistan，他把native pe用在他的英文pe，开始有问题，后来在论坛高手的帮助下解决了

zds1210

已经看懂了，是来自巴基斯坦的朋友，无忧已经变成国际性论坛了，香港台湾和国外都有。

zds1210

最近native版PE有点牛。希望能取得更大进展。