mkisofs V3.01a0 for win32

wang6610

http://www.paehl.com/open_source/downloads/cdrtools-win32.7z



mkisofs -help
Usage: mkisofs [options] [-find] file... [find expression]
Options:
  -find file... [find expr.]  Option separator: Use find command line
to the rig
ht
  -posix-H                    Follow symbolic links encountered on
command line
  -posix-L                    Follow all symbolic links
  -posix-P                    Do not follow symbolic links (default)
  -abstract FILE              Set Abstract filename
  -A ID, -appid ID            Set Application ID
  -biblio FILE                Set Bibliographic filename
  -cache-inodes               Cache inodes (needed to detect hard
links)
  -no-cache-inodes            Do not cache inodes (if filesystem has no
unique i
nodes)
  -rrip110                    Create old Rock Ridge V 1.10
  -rrip112                    Create new Rock Ridge V 1.12 (default)
  -check-oldnames             Check all imported ISO9660 names from old
session
  -check-session FILE         Check all ISO9660 names from previous
session
  -copyright FILE             Set Copyright filename
  -debug                      Set debug flag
  -b FILE, -eltorito-boot FILE
                              Set El Torito boot image name
  -eltorito-alt-boot          Start specifying alternative El Torito
boot parame
ters
  -eltorito-platform ID       Set El Torito platform id for the next
boot entry
  -B FILES, -sparc-boot FILES Set sparc boot image names
  -sunx86-boot FILES          Set sunx86 boot image names
  -G FILE, -generic-boot FILE Set generic boot image name
  -sparc-label label text     Set sparc boot disk label
  -sunx86-label label text    Set sunx86 boot disk label
  -c FILE, -eltorito-catalog FILE
                              Set El Torito boot catalog name
  -C PARAMS, -cdrecord-params PARAMS
                              Magic paramters from cdrecord
  -d, -omit-period            Omit trailing periods from filenames
(violates ISO
9660)
  -data-change-warn           Treat data/size changes as warning only
  -dir-mode mode              Make the mode of all directories this
mode.
  -D, -disable-deep-relocation
                              Disable deep directory relocation
(violates ISO966
0)
  -file-mode mode             Make the mode of all plain files this
mode.
  -errctl name                Read error control defs from file or
inline.
  -f, -follow-links           Follow symbolic links
  -gid gid                    Make the group owner of all files this
gid.
  -graft-points               Allow to use graft points for filenames
  -root DIR                   Set root directory for all new files and
directori
es
  -old-root DIR               Set root directory in previous session
that is sea
rched for files
  -help                       Print option help
  -hide GLOBFILE              Hide ISO9660/RR file
  -hide-list FILE             File with list of ISO9660/RR files to
hide
  -hidden GLOBFILE            Set hidden attribute on ISO9660 file
  -hidden-list FILE           File with list of ISO9660 files with
hidden attrib
ute
  -hide-joliet GLOBFILE       Hide Joliet file
  -hide-joliet-list FILE      File with list of Joliet files to hide
  -hide-udf GLOBFILE          Hide UDF file
  -hide-udf-list FILE         File with list of UDF files to hide
  -hide-joliet-trans-tbl      Hide TRANS.TBL from Joliet tree
  -hide-rr-moved              Rename RR_MOVED to .rr_moved in Rock
Ridge tree
  -gui                        Switch behaviour for GUI
  -input-charset CHARSET      Local input charset for file name
conversion
  -output-charset CHARSET     Output charset for file name conversion
  -iso-level LEVEL            Set ISO9660 conformance level (1..3) or 4
for ISO9
660 version 2
  -J, -joliet                 Generate Joliet directory information
  -joliet-long                Allow Joliet file names to be 103 Unicode
characte
rs
  -jcharset CHARSET           Local charset for Joliet directory
information
  -l, -full-iso9660-filenames Allow full 31 character filenames for
ISO9660 name
s
  -max-iso9660-filenames      Allow 37 character filenames for ISO9660
names (vi
olates ISO9660)
  -allow-leading-dots         Allow ISO9660 filenames to start with '.'
(violate
s ISO9660)
  -ldots                      Allow ISO9660 filenames to start with '.'
(violate
s ISO9660)
  -log-file LOG_FILE          Re-direct messages to LOG_FILE
  -long-rr-time               Use long Rock Ridge time format
  -m GLOBFILE, -exclude GLOBFILE
                              Exclude file name
  -exclude-list FILE          File with list of file names to exclude
  -modification-date DATE     Set the modification date field of the
PVD
  -nobak                      Do not include backup files
  -no-bak                     Do not include backup files
  -pad                        Pad output to a multiple of 32k (default)
  -no-pad                     Do not pad output to a multiple of 32k
  -no-limit-pathtables        Allow more than 65535 parent directories
(violates
ISO9660)
  -no-long-rr-time            Use short Rock Ridge time format
  -M FILE, -prev-session FILE Set path to previous session to merge
  -dev SCSIdev                Set path to previous session to merge
  -N, -omit-version-number    Omit version number from ISO9660 filename
(violate
s ISO9660)
  -new-dir-mode mode          Mode used when creating new directories.
  -force-rr                   Inhibit automatic Rock Ridge detection
for previou
s session
  -no-rr                      Inhibit reading of Rock Ridge attributes
from prev
ious session
  -no-split-symlink-components
                              Inhibit splitting symlink components
  -no-split-symlink-fields    Inhibit splitting symlink fields
  -o FILE, -output FILE       Set output file name
  -path-list FILE             File with list of pathnames to process
  -p PREP, -preparer PREP     Set Volume preparer
  -print-size                 Print estimated filesystem size and exit
  -publisher PUB              Set Volume publisher
  -quiet                      Run quietly
  -r, -rational-rock          Generate rationalized Rock Ridge
directory informa
tion
  -R, -rock                   Generate Rock Ridge directory information
  -s TYPE, -sectype TYPE      Set output sector type to e.g.
data/xa1/raw
  -short-rr-time              Use short Rock Ridge time format
  -sort FILE                  Sort file content locations according to
rules in
FILE
  -split-output               Split output into files of approx. 1GB
size
  -stream-file-name FILE_NAME Set the stream file ISO9660 name (incl.
version)
  -stream-media-size #        Set the size of your CD media in sectors
  -sysid ID                   Set System ID
  -T, -translation-table      Generate translation tables for systems
that don't
understand long filenames
  -table-name TABLE_NAME      Translation table file name
  -ucs-level LEVEL            Set Joliet UCS level (1..3)
  -udf                        Generate rationalized UDF file system
  -UDF                        Generate UDF file system
  -udf-symlinks               Create symbolic links on UDF image
(default)
  -no-udf-symlinks            Do not reate symbolic links on UDF image
  -dvd-video                  Generate DVD-Video compliant UDF file
system
  -uid uid                    Make the owner of all files this uid.
  -U, -untranslated-filenames Allow Untranslated filenames (for HPUX &
AIX - vio
lates ISO9660). Forces -l, -d, -N, -allow-leading-dots, -relaxed-
filenames, -all
ow-lowercase, -allow-multidot
  -relaxed-filenames          Allow 7 bit ASCII except lower case
characters (vi
olates ISO9660)
  -no-iso-translate           Do not translate illegal ISO characters
'~', '-' a
nd '#' (violates ISO9660)
  -allow-lowercase            Allow lower case characters in addition
to the cur
rent character set (violates ISO9660)
  -allow-multidot             Allow more than one dot in filenames
(e.g. .tar.gz
) (violates ISO9660)
  -use-fileversion LEVEL      Use file version # from filesystem
  -v, -verbose                Verbose
  -version                    Print the current version
  -V ID, -volid ID            Set Volume ID
  -volset ID                  Set Volume set ID
  -volset-size #              Set Volume set size
  -volset-seqno #             Set Volume set sequence number
  -x FILE, -old-exclude FILE  Exclude file name(depreciated)
  -hard-disk-boot             Boot image is a hard disk image
  -no-emul-boot               Boot image is 'no emulation' image
  -no-boot                    Boot image is not bootable
  -boot-load-seg #            Set load segment for boot image
  -boot-load-size #           Set numbers of load sectors
  -boot-info-table            Patch boot image with info table
  -XA                         Generate XA directory attributes
  -xa                         Generate rationalized XA directory
attributes
  -z, -transparent-compression
                              Enable transparent compression of files
  -hfs-type TYPE              Set HFS default TYPE
  -hfs-creator CREATOR        Set HFS default CREATOR
  -g, -apple                  Add Apple ISO9660 extensions
  -h, -hfs                    Create ISO9660/HFS hybrid
  -map MAPPING_FILE           Map file extensions to HFS TYPE/CREATOR
  -magic FILE                 Magic file for HFS TYPE/CREATOR
  -probe                      Probe all files for Apple/Unix file types
  -mac-name                   Use Macintosh name for
ISO9660/Joliet/RockRidge fi
le name
  -no-mac-files               Do not look for Unix/Mac files
(depreciated)
  -boot-hfs-file FILE         Set HFS boot image name
  -part                       Generate HFS partition table
  -cluster-size SIZE          Cluster size for PC Exchange Macintosh
files
  -auto FILE                  Set HFS AutoStart file name
  -no-desktop                 Do not create the HFS (empty) Desktop
files
  -hide-hfs GLOBFILE          Hide HFS file
  -hide-hfs-list FILE         List of HFS files to hide
  -hfs-volid HFS_VOLID        Volume name for the HFS partition
  -icon-position              Keep HFS icon position
  -root-info FILE             finderinfo for root folder
  -input-hfs-charset CHARSET  Local input charset for HFS file name
conversion
  -output-hfs-charset CHARSET Output charset for HFS file name
conversion
  -hfs-unlock                 Leave HFS Volume unlocked
  -hfs-bless FOLDER_NAME      Name of Folder to be blessed
  -hfs-parms PARAMETERS       Comma separated list of HFS parameters
  -prep-boot FILE             PReP boot image file -- up to 4 are
allowed
  -chrp-boot                  Add CHRP boot header
  --cap                       Look for AUFS CAP Macintosh files
  --netatalk                  Look for NETATALK Macintosh files
  --double                    Look for AppleDouble Macintosh files
  --ethershare                Look for Helios EtherShare Macintosh
files
  --exchange                  Look for PC Exchange Macintosh files
  --sgi                       Look for SGI Macintosh files
  --macbin                    Look for MacBinary Macintosh files
  --single                    Look for AppleSingle Macintosh files
  --ushare                    Look for IPT UShare Macintosh files
  --xinet                     Look for XINET Macintosh files
  --dave                      Look for DAVE Macintosh files
  --sfm                       Look for SFM Macintosh files
  --osx-double                Look for MacOS X AppleDouble Macintosh
files
  --osx-hfs                   Look for MacOS X HFS Macintosh files
  -no-hfs                     Do not create ISO9660/HFS hybrid


以下批是抄来的.........
mkisofs.exe  -J -joliet-long -l -b GRLDR -output-charset utf8  -hide-joliet boot.catalog -o TEST.ISO -v -V "BOOT" -relaxed-filenames -no-emul-boot -boot-load-size 4  boot



mkisofs.exe  -l -b GRLDR -r -output-charset utf8  -hide-joliet boot.catalog -o TEST.ISO -v -V "BOOT" -relaxed-filenames -no-emul-boot -boot-load-size 4  boot  


mkisofs.exe  -b GRLDR -R -output-charset utf8  -o MaxBOOTt.ISO -v -V "MaxBOOT" -no-emul-boot -boot-load-size 4  boot

[ 本帖最后由 wang6610 于 2012-1-7 20:41 编辑 ]

yjd

参数真是够多了的。。。

510819776

谢谢了
这是好东西 留个记号了

wang6610

原帖由 2011hnfeng 于 2012-1-9 09:15 发表
同楼上啊，看不懂洋文

那就等着用中文的.............................

2011hnfeng

同楼上啊，看不懂洋文

HY

很不错的工具，就是我不会用，悲哀啊。。。。。。。。。

zhs509

还是不会用啊，楼主能否给个小模板我们试试看。。。

sratlf

你可以试试用1#的批处理  配合1#的mkisofs能不能执行。。。

wang6610

不同版本参数用法,有区别的..........

sratlf

貌似1#的没办法直接用

zhs509

看了1楼额bat命令还是不会用。。。

zhs509

哈哈 楼主要是顺便给个通用的bat就好了

weibin6199

刚刚在找，，谢谢楼主//

wang6610

Please have a look at the German open Source Center BerliOS at www.berlios.de
BerliOS will continue to support free hosting of cryptography projects even
when US laws change and don't allow to host cryptography projects in the USA.
Also look at sourcewell.berlios.de, the first Open Source announcement service
that itself is implemented as Open Source project.

***************** Important news ****************************

For the 'Slottable Source Plugin Module' SSPM Features read README.SSPM

***************** Please Test *********************************

NEW features of cdrtools-3.01a06:

This is the first localization step for cdrtools. All programs now (hopefully)
call gettext() for all strings that need localization.

-        The next step will include dgettext() calls for the libraries.

-        The following step will include the extracted strings

-        The last step will include German translations and install support
        for the resulting binary message object files.

----------> Please test and report compilation problems! <---------

***** NOTE: As mentioned since 2004, frontends to cdrtools should *****
*****                call all programs from cdrtools in the "C" locale *****
*****                by e.g. calling: LC_ALL=C cdrecord ....                  *****
*****                unless these frontends support localized strings  *****
*****                used by the cdrtools with NLS support.                  *****

This version compiles on Win-DOS using the Microsoft compiler cl.exe but
warning: due to missing POSIX compliance with basic features (e.g. stat()
does not return inode numbers), there are many problems with the resulting
code and thus it is recommended to better use a POSIX layer on top of
WIN-DOS.

All:

-        A new rule RULES/profiled.lnk allows to call:

        smake COPTX=-pg LDOPTX=-pg LINKMODE=profiled

        to create binaries that use gprof.

-        The Makefile System is now able to switch gmake-3.82 into a more POSIX
        compliant mode to tell the shell to report problems back to gmake.

-        New autocof tests on whether printf supoorts %lld and %jd

-        Fixed the vc9-setup files to make VC9 work.

-        Newer Cygwin "tail" versions do no longer support UNIX syntax.
        change tail +2 to tail -n +2 in RULES/cc-mcs.rul to allow to use
        the Microsoft compiler again

-        A new environment variable MKLINKS_COPY allows to tell all
        MKLINS scripts to generate file copies rather than symlinks.
        Call:
                MKLINKS_COPY=true
                export MKLINKS_COPY
        to enable this feature

-        Run an additional test -h command in MKLNKS to verify whether mingw
        supports symlinks

-        MKLINKS now creates copies instead of symlink when we use MSC
        as MSC does not support to read symlinks files

-        Fixed a typo in include/schily/libport.h (group functions have been
        defined to return struct passwd* instead of struct group*

-        Fixed wrong bracketing for C++ in include/schily/stdlib.h

-        Fixed wrong bracketing for C++ in include/schily/utypes.h

-        Added a workaround for MSC to include/schily/utypes.h
        MSC believes that a 32 bit int and a 32 bit long are incompatible
        and cannot even be casted, so we need to make uint32_t a n unsigned long

-        Let include/schily/archdefs.h define the standard processor #defines
        when compiling with MSC.

-        New include file include/schily/windows.h works around the oddities
        from the MSC include file windows.h

-        include/schily/stdio.h now defines popen()/pclose() to _popen()/_pclose()
        if on WIN-DOS

-        include/schily/limits.h now defines PIPE_BUF

-        include/schily/utsname.h now defines struct utsname for our MSC uname()
        emulation.


-        The setup for the PATHs needed by Visual Studio 9 has been
        corrected.

-        autoconf has been modified to avoid optimizing away code that
        is intended for testing. This help to work against a problem
        with detecting mbrtowc() on MinGW

-        autoconf now tests for mbtowc() and wctomb()

-        RULES/i*86-mingw32_nt-gcc.rul now link against -lmingw32 instead
        of -lmgw32.

-        include/schily/stat.h now defines S_IREAD/S_IWRITE/S_IEXEC
        These macros are available on typical UNIX systems but not
        on Android. The definition comes from UNIX V7 and is not in
        POSIX. Needed by SCCS and the Bourne Shell

-        include/schily/wait.h now defines WIFCONTINUED() if needed

-        include/schily/wchar.h now defines mbtowc() to mbrtowc() if
        needed (e.g. on Android)

-        include/schily/ccomdefs.h now correctly knows about the GCC
        release that introduced __attribute__ (used).

-        Android is not POSIX (by not defining various functions as functions
        in libc as required by POSIX) because it tries to define many
        functions that are part of the standard as inline macros in
        include files only. This breaks autoconf, so we needed to rewrite
        some tests (e.g for getpagesize, tcgetpgrp, tcsetpgrp)

-        The Schily autoconf system has been enhanced to support cross
        compilation. Schily autoconf is based on GNU autoconf and
        GNU autoconf does not support cross compilation because it needs
        to run scripts on the target system for some of the tests.

        The "configure" script that is delivered with the Schily makefile
        system runs 718 tests and 68 of them need to be run on the target
        system.

        The Schily autoconf system now supports a method to run these 65
        tests natively on a target system. You either need a machine with
        remote login features or you need an emulator with a method to
        copy files into the emulated system and to run binaries on the
        emulated system as e.g. the Android emulator.

        We currently deliver three scripts for "remote" execution of
        programs on the target system:

        runrmt_ssh                runs the commands remove via ssh
        runrmt_rsh                runs the commands remove via rsh
        runrmt_android                runs the commands remove via the debug bridge

        If you need to remotely run programs on a system that is not
        supported by one of there three scripts, you need to modify one
        of them to match your needs.

        To enable Cross Compilation use the following environment variables:

        CONFIG_RMTCALL=                Set up to point to a script that does
                                the remote execution, e.g.:

                                CONFIG_RMTCALL=`pwd`/conf/runrmt_ssh

        CONFIG_RMTHOST=                Set up to point to your remote host, e.g.:

                                CONFIG_RMTHOST=hostname
                                or
                                CONFIG_RMTHOST=user@hostname

                                use a dummy if you like to use something
                                like to the Android emulator.

        CONFIG_RMTDEBUG=        Set to something non-null in order to
                                let the remote execution script mark
                                remote comands. This will result in
                                configure messages like:

                                checking bits in minor device number... REMOTE 8

        Note that smake includes automake features that automatically
        retrieve system ID information. For this reason, you need to overwrite
        related macros from the command line if you like to do a
        cross compilation.

        Related make macros:

        K_ARCH=                        # (sun4v) Kernel ARCH filled from uname -m / arch -k
        M_ARCH=                        # (sun4)  Machine filled from arch
        P_ARCH=                        # (sparc) CPU ARCH filled from uname -p / mach
        OSNAME=                        # sunos, linux, ....
        OSREL=                        # 5.11
        OSVERSION=                # snv_130
        CCOM=                        # generic compiler name (e.g. "gcc")
        CC_COM=                        # compiler to call (name + basic args)

        ARCH=                        overwrites M_ARCH and P_ARCH

        It is usually suffucient to set ARCH and OSNAME.

        In order to use a cross compiler environment instead of a native compiler,
        set the make macro CC_COM to something different than "cc".

        If you are on Linux and like to compile for Android, do the following:

        1)         set up CC acording to the instructions from the cross compiler
                tool chain

        2)        set environment variables CONFIG_RMTCALL / CONFIG_RMTHOST, e.g.:
                setenv CONFIG_RMTCALL `pwd`/conf/runrmt_android
                setenv CONFIG_RMTHOST NONE

        3)        call smake:

                smake ARCH=armv5 OSNAME=linux CCOM=gcc "CC_COM=$CC"
       

-        Several programs no longer test for HAVE_DEV_* but for HAVE__DEV_*
        as we did switch from hand written tests for /dev/tty, /dev/null
        and similar to  AC_CHECK_FILES(/dev/tty /dev/null /dev/zero)

-        The Makefile system now links dynamic libraries on Mac OS X against
        libgcc_s.1 instead of libgcc.

Libschily:

-        New function permtostr() in libschily allows to convert a
        mode_t like stat.st_mode into a chmod compliant string like:

                u=rw,g=r,o=r

        that is accepted by libschily::getperm() to allow a  conversion
        back to a mode_t variable.

-        libschily::rename() now uses mktemp() to temorarily save the
        rename target file.

-        comerr() now maps exit codes that would fold to '0' to EX_CLASH
        which is -64

-        New functions zerobytes() and cmpmbytes() added to libschily.

-        New functions strstr() and wcsstr() added to libschily.

-        libschily/fexec.c moved the workaround against the Mac OS X linker
        for "environ" upwards to cover the new code also.

-        Fixed libschily/gettimeofday.c to compile with MSC

-        Fixed libschily/sleep.c to compile with MSC

-        Fixed libschily/usleep.c to be empty with MSC as sleep.c includes
        a working usleep()

-        libschily/gethostname.c enhanced to support Win-DOS with cl.exe

-        libschily/uname.c New function to support Win-DOS with cl.exe

-        libschily/dirent.c New functions: opendir()/closedir()/readdir()
                                to support Win-DOS with cl.exe

-        libschily/kill.c New function to support Win-DOS with cl.exe

-        libschily/stdio/fgetline.c 64 bit speedup by calling fgets() in
        case that getc() is not a macro.

-        libschily/stdio/fgetstr.c 64 bit speedup by calling fgets() in
        case that getc() is not a macro.

-        libschily/chown.c new to support Win-DOS with cl.exe

Libparanoia (Ported/enhanced by J鰎g Schilling, originated by Monty xiphmont@mit.edu):

Libedc (Optimized by J鰎g Schilling, originated by Heiko Ei遞eldt heiko@hexco.de):

Libcdrdeflt:

Libdeflt:

Libfind:

-        libfind/find.c disables -exec in case there is no fork().
        This is in order to support MINGW

Libfile:

Libhfs_iso:

Libsiconv:

Libscg:

-        libscg::scsi-aix.c was updated with some experimental code to support
        two new SCSI kernel interfaces on AIX.

-        Allow to disable the SCSI low level transport adoption layer
        from libscg by adding -DNO_SCSI_IMPL

-        libscg/scsihack.c now supports the MSC compiler

-        Several small changes to work around oddoties fount in MS include files

-        Trying to better support AIX again.

Libscgcmd:

Libmdigest:

Rscsi:

Cdrecord:

-        Several changes to support mingw and MSC

Cdda2wav (Maintained/enhanced by J鰎g Schilling, originated by Heiko Ei遞eldt heiko@hexco.de):

-        Several changes to support mingw and MSC

Readcd:

-        Better algorithm for -edc-corr

Scgcheck:

-        Several changes to support mingw and MSC

Scgskeleton:

Btcflash:

Mkisofs (Maintained/enhanced by J鰎g Schilling since 1997, originated by Eric Youngdale):

-        The mkisofs diagnostic tools now support MSC that does not support
        POSIX terminal handling.

        HELIOS TODO:

        -        Add the HELIOS UNICODE mapping code. This needs to be done
                at UCS-2 level for Joliet and UDF (instead of UTF-8) and only
                for Rock Ridge (in case of a UTF-8 based target locale) using
                UTF-8 based translations.

        -        Make the Apple extensions work again with "mkisofs -find"

TODO:
        -        Support correct inode numbers for UDF hardlinks

        -        Support sockets, pipes, char/blk-dev specials with UDF

        -        read Joliet filenames with multi-session if no TRANS.TBL
                or RR is present. I am looking for a volunteer for this task!

                Note that this can never be 100% correct as there is no relation
                between the names on the master (UNIX) filesystem, the ISO-9660
                names and the Joliet names. Only the Rock Ridge names are
                untranslated with respect to the original files on the
                master (UNIX) filesystem.

        -        add libecc/edc for CDI and similar.


CYGWIN NT-4.0 NOTES:

To compile on Cygwin32, get Cygwin and install it.
For more information read README.win32

The files are located on:

ftp://ftp.berlios.de/pub/cdrecord/alpha ...

NOTE:        These tar archives are 100% POSIX compatible. GNU tar may get some
        minor trouble. If you like a 100% POSIX compliant tar, get star from
        ftp://ftp.berlios.de/pub/star/

WARNING: Do not use 'winzip' to extract the tar file!
        Winzip cannot extract symbolic links correctly.

Joerg