.usb文件的制作知识普及教程

熄灭的烟

群里有没有大神普及下.usb文件的知识，写个教程。这方面的资料连百度都搜索不到。只能求助论坛里的各位大神了。

熄灭的烟

hkkitlee 发表于 2021-5-13 13:35
還以為寫了沒幾人看過...

你的教程真的很棒，面面俱到了。就是全部都是繁体字的文章，如果没有需求的人初次看的话让人想放弃。有需求的人如果仔细看的话，几乎都能找到自己需要的那部分知识内容。给你点赞

hkkitlee

2013mqqdg 发表于 2021-5-12 17:20
可以参考这位的，挺全面的http://wuyou.net/forum.php?mod=redirect&goto=findpost&ptid=415206&pid=3818 ...

還以為寫了沒幾人看過...

友联电脑

了解基础理论知识，才能指导实践，依葫芦画瓢只会有结果，没有知识的积累，后续遇到问题也可能不会分析找原因，提高不容易

熄灭的烟

2013mqqdg 发表于 2021-5-12 17:20
可以参考这位的，挺全面的http://wuyou.net/forum.php?mod=redirect&goto=findpost&ptid=415206&pid=3818 ...

谢谢坛友，从你分享的帖子里找到我需要的那部分资料了。非常感谢！！！

2013mqqdg

熄灭的烟 发表于 2021-5-12 11:03
大佬，如何做个既支持BIOS模式，又支持UEFI模式启动的.usb格式的引导程序呢？

可以参考这位的，挺全面的http://wuyou.net/forum.php?mod=redirect&goto=findpost&ptid=415206&pid=3818975&fromuid=477695

熄灭的烟

友联电脑 发表于 2021-5-11 19:38
Using a boot CD-ROM or USB keyYou can put iPXE on a bootable CD-ROM or USB key, and use this to boot ...

大佬，如何做个既支持BIOS模式，又支持UEFI模式启动的.usb格式的引导程序呢？

友联电脑

Using a boot CD-ROM or USB key

You can put iPXE on a bootable CD-ROM or USB key, and use this to boot (almost) any machine using iPXE. This can be useful if you only occasionally need to boot machines using iPXE, or if you are dealing with computers that you don't personally control.

You can build an iPXE bootable CD-ROM image using:

  make bin/ipxe.iso         编译目标iso，用于.......

and then burn bin/ipxe.iso onto a blank CD-ROM or DVD-ROM.

You can build an iPXE bootable USB key image using:

  make bin/ipxe.usb         编译目标usb  dd if=bin/ipxe.usb of=/dev/sdX     将目标文件usb写入usb设备，用于usb引导

where /dev/sdX is the device representing your USB key. Please note that this will erase any existing contents of the USB key.

Chainloading from an existing PXE ROM

You can chainload iPXE from an existing PXE ROM. This is useful if you have a large number of machines that you want to be able to boot using iPXE, but you do not want to reflash the network card on each individual machine.

You can build a chainloadable iPXE image using:

  make bin/undionly.kpxe      编译undionly驱动的目标文件，用于pxe引导

You can now configure your network for chainloading.

Replacing an existing PXE ROM

[size=12.800000190734863px]You can replace the PXE ROM on your network card (or motherboard) with iPXE. This is useful if you want the machine to always be able to boot using iPXE, without depending on a CD-ROM or a chainloader.

[size=12.800000190734863px]You will need to build a ROM image for your specific network card using something like:

  make bin/808610de.rom         编译对应芯片ID的ROM,用于网卡烧录