带 SATA、SCSI RAID 和 SMP 支持的 PE （25.5MB）[更新：2007-04-15]

asbai · 发表于 2006-12-20 00:05:34

原帖由 wuyouman01 于 2006-12-18 10:18 PM 发表
用VM测了下蓝屏，代码：0XED。

VMWare？内存设到多大？什么版本？

jhdn · 发表于 2006-12-20 17:45:10

谢谢，支持楼主了。

wuyouman01 · 发表于 2006-12-20 21:50:09

原帖由 asbai 于 2006-12-20 12:05 AM 发表

VMWare？内存设到多大？什么版本？

内存设128,1楼的版本。

asbai · 发表于 2006-12-21 05:54:50

原帖由 wuyouman01 于 2006-12-20 09:50 PM 发表

内存设128,1楼的版本。

128肯定是不行的，最小144，推荐160.

ychiou · 发表于 2006-12-24 11:05:43

原来这样,设的内存小了

MVP · 发表于 2006-12-24 15:32:26

楼主把winpe的目录改成PXE了，怪不得启动不了。

asbai · 发表于 2006-12-25 14:00:02

原帖由 MVP 于 2006-12-24 03:32 PM 发表
楼主把winpe的目录改成PXE了，怪不得启动不了。

啥意思？偶好像没改过目录，跟毛桃兄那个版本目录结构是一样的。:lol

sunsmile23 · 发表于 2006-12-27 21:50:03

这个应该是硬件适应性最好的PE了吧？收藏一个。

realhyg · 发表于 2006-12-27 22:42:29

硬件适应性最好的PE 确实是

oar · 发表于 2007-1-11 23:11:01

白杨兄弟，你的recoverware更新了，这个pe能否也更新下工具，或者集成个卡巴斯基呢？

asbai · 发表于 2007-1-12 14:56:50

oar兄明鉴，俺的 RecoveryWare 这次更新的是 RW 软件本身，其基于的 PE 环境和驱动没什么更新，所以这里也没啥好更新的啦 :p。

至于外置工具的更新，俺在这里提供的只是一个 PE 核镜像，并无任何外置工具，这又让在下从何更新那？;)

其实一楼已经说明，这个 PE 镜像脱胎于毛桃兄的 PE 环境，只不过解决了个别问题，又增加了若干磁盘驱动而已。此镜像不带任何外置工具，并不是单独使用的，而是要替换毛桃兄 PE 环境中的同名文件来用～

acoa · 发表于 2007-1-12 17:02:43

请教一下asbai大师，现在的ICH7都集成了HD声音总线，能不能像SATA那样将其放到txtsetup.sif中，以便在启动完成后可以识别出来。附上HD总线驱动。谢谢。

retard · 发表于 2007-1-12 17:51:52

正在下载

asbai · 发表于 2007-1-13 01:28:26

原帖由 acoa 于 2007-1-12 05:02 PM 发表
请教一下asbai大师，现在的ICH7都集成了HD声音总线，能不能像SATA那样将其放到txtsetup.sif中，以便在启动完成后可以识别出来。附上HD总线驱动。谢谢。

放在 txtsetup 里应该可以，不过这个音频驱动是 SERVICE_DEMAND_START TYPE，外置也是完全可以的。

acoa · 发表于 2007-1-13 08:33:27

原帖由 asbai 于 2007-1-13 01:28 AM 发表

放在 txtsetup 里应该可以，不过这个音频驱动是 SERVICE_DEMAND_START TYPE，外置也是完全可以的。

外置是可以。我试过。但有一问题是：HD总线是先安装完总线驱动后，才会出现声卡硬件来适配相应的声卡驱动，这样的话就要执行两次安装驱动程序，较麻烦。我是想把它放在TXTSETUP.SIF里，启动后就可以直接出来声卡硬件，直接装声卡驱动，这样执行一次安装驱动程序就可以了。

newage · 发表于 2007-1-13 09:45:45

这个好老毛头的那个1111版有啥区别？老马头那个在我的napa平台下不能从dos进入

asbai · 发表于 2007-1-13 15:23:10

原帖由 newage 于 2007-1-13 09:45 AM 发表
这个好老毛头的那个1111版有啥区别？老马头那个在我的napa平台下不能从dos进入

间一楼说明 :P，此外启动 PE 环境不推荐用 grub4dos，偶已经多次碰到硬件兼容性问题，推荐使用 bootpart 直接做一个 nt boot 引导区。

newage · 发表于 2007-1-13 16:17:08

原帖由 asbai 于 2007-1-13 03:23 PM 发表

间一楼说明 :P，此外启动 PE 环境不推荐用 grub4dos，偶已经多次碰到硬件兼容性问题，推荐使用 bootpart 直接做一个 nt boot 引导区。

zip格式的u盘也能做？

asbai · 发表于 2007-1-14 02:33:33

原帖由 newage 于 2007-1-13 04:17 PM 发表

zip格式的u盘也能做？

虚拟成 zip 驱动器的 U 盘？没试过，应该可以吧，只要分区格式对，nt boot loader 能起来。

waltone · 发表于 2007-1-20 10:05:51

收下了,谢谢楼主

lyljj · 发表于 2007-2-12 08:42:35

向楼主报告一下，我在公司的惠普服务器上测试了，找不到硬盘。服务器用的是Smart Array 642 Controllers和Adaptec I20 RAID Adapters。你的PE上有这两个驱动，通过软驱加载时提示已经有这两个驱动了，如果不加载就PE就找不到硬盘，只有通过F6手动从软驱加载驱动才能认出硬盘。希望楼主能再完善一下。总体来说很不错，启动速度快又稳定，我用你的PE已经在好多服务器上给系统做Ghost备份了，以前用深山红叶的认硬盘的就认，不认的加载驱动也蓝屏不认，多亏了你的PE我才能在所有的服务器上都做Ghost了，真的很感谢你！！！

marburry · 发表于 2007-2-13 10:24:56

希望楼主可以加入dell 2950、2850的SCSI驱动阿，这些机器用的人应该很多的。

这个网站上有
http://www.serverol.com/download/view_down.asp?dlid=891

[ 本帖最后由 marburry 于 2007-2-13 10:28 AM 编辑 ]

lxn74 · 发表于 2007-2-13 10:35:12

好东西

mmo829 · 发表于 2007-2-14 15:36:38

學習的機會來
頂

asbai · 发表于 2007-2-18 04:14:05

原帖由 lyljj 于 2007-2-12 08:42 AM 发表
向楼主报告一下，我在公司的惠普服务器上测试了，找不到硬盘。服务器用的是Smart Array 642 Controllers和Adaptec I20 RAID Adapters。你的PE上有这两个驱动，通过软驱加载时提示已经有这两个驱动了，如果不加载就 ...

估计是 HP 用的 HWID 比较特别，老兄按 F6 通过软盘加载的那个驱动里面的 inf 文件方便发上来看看吗？:)

asbai · 发表于 2007-2-18 04:15:14

原帖由 marburry 于 2007-2-13 10:24 AM 发表
希望楼主可以加入dell 2950、2850的SCSI驱动阿，这些机器用的人应该很多的。

这个网站上有
http://www.serverol.com/download/view_down.asp?dlid=891

DELL 自己好像不做 SCSI 控制器吧？不知这两款用的是哪家的，有空过去看看 :)

lyljj · 发表于 2007-2-26 21:39:38

Txtsetup.oem内容如下（我把这两个驱动放到一张软盘上了）：

[Disks]
d1 = "ProLiant(R) Support Paq for Microsoft(R) Windows 2000(TM) Storage Products",\txtsetup.oem,\

##################################################################################################
[Defaults]
SCSI = B060

[SCSI]
B060 = "Smart Array 5300 Controller"
B178 = "Smart Array 5i, 532, 5312 Controllers"
0046 = "Smart Array 641, 642, 6400 Controllers"
dpti2o = "Adaptec I2O RAID Adapters for Windows 2000 & XP 32bit"
MegaIDE100_NT5 = "CSB-6 Ultra ATA-100 IDE RAID Controller (Windows 2000/Server 2003)", LSICSB6
MegaIDE100_NT5C =    "Integrated Ultra ATA-100 Dual Channel Controller (Windows 2000)", MegaIDE
MegaIDE100_NT5L =    "Integrated Ultra ATA-100 IDE RAID Controller (Windows 2000)", MegaIDE
SYMMPI_2K = "LSI Logic Ultra320 1020/1030 Driver (Windows 2000)",symmpi

[Files.scsi.B060]
driver  = d1,cpqcissm.sys,cpqcissm
inf    = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat

[Files.scsi.B178]
driver  = d1,cpqcissm.sys,cpqcissm
inf    = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat

[Files.scsi.0046]
driver  = d1,cpqcissm.sys,cpqcissm
inf    = d1,cpqcissm.inf
catalog = d1,cpqcissm.cat

[Files.scsi.dpti2o]
driver  = d1, dpti2o.sys, dpti2o
catalog = d1, dpti2o.cat
inf    = d1, oemsetup.inf
inf    = d1, adptmgt.inf

[Config.dpti2o]
value = "", Type, REG_DWORD, 1
value = "", Start, REG_DWORD, 0
value = "", Group, REG_SZ, "SCSI miniport"
value = "", ErrorControl, REG_DWORD, 1
value = Parameters\Device, NumberOfRequests, REG_DWORD, 040

[Config.cpqcissm]
value = "",tag,REG_DWORD,103
value = Parameters\PnpInterface,5,REG_DWORD,1
value = Parameters\Device,NumberOfRequests,REG_DWORD,80

[HardwareIds.scsi.B060]
id = "PCI\VEN_0E11&DEV_B060","cpqcissm"

[HardwareIds.scsi.B178]
id = "PCI\VEN_0E11&DEV_B178","cpqcissm"

[HardwareIds.scsi.0046]
id = "PCI\VEN_0E11&DEV_0046","cpqcissm"

[HardwareIds.scsi.dpti2o]
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0011044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0021044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0031044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0041044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0051044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C00A1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C00B1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C00C1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C00D1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C00E1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C00F1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0141044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0151044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0161044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C01E1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C01F1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0201044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0211044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0281044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0291044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C02A1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C03C1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C03D1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C03E1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0461044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0471044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0481044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0501044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0511044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0521044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C05A1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C05B1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A511&SUBSYS_C05F1044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0641044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0651044", "dpti2o"
id = "PCI\VEN_1044&DEV_A501&SUBSYS_C0661044", "dpti2o"
id = "PCI\VEN_1044&DEV_A511&SUBSYS_C0321044", "dpti2o"
id = "PCI\VEN_1044&DEV_A511&SUBSYS_C0331044", "dpti2o"
id = "PCI\VEN_1044&DEV_A511&SUBSYS_C0661044", "dpti2o"
id = "PCI\VEN_1044&DEV_A511&SUBSYS_C0341044", "dpti2o"
id = "PCI\VEN_1044&DEV_A511&SUBSYS_C0351044", "dpti2o"

# This section lists the files that should be copied if the user
# selects a particular component option.
#
# <file_type> is one of driver, port, class, dll, hal, inf, or detect.
# See below.
# <source_disk> identifies where the file is to be copied from, and must
# match en entry in the [Disks] section.
# <filename> is the name of the file. This will be appended to the
# directory specified for the disk in the [Disks] section to form the
# full path of the file on the disk.

[Files.scsi.MegaIDE100_NT5]
driver  = d1, LsiCsb6.sys, LSICSB6
inf    = d1, LsiCsb6.inf
inf    = d1, NODEV.inf
catalog = d1, Csb6Win.cat

[HardwareIds.scsi.MegaIDE100_NT5]
id="PCI\VEN_1166&DEV_0213&SUBSYS_00E80E11", "LSICSB6"

[Config.MegaIDE]
value = "", Tag, REG_DWORD, 1

# This section lists the files that should be copied if the user
# selects a particular component option.
#
# <file_type> is one of driver, port, class, dll, hal, inf, or detect.
# See below.
# <source_disk> identifies where the file is to be copied from, and must
# match en entry in the [Disks] section.
# <filename> is the name of the file. This will be appended to the
# directory specified for the disk in the [Disks] section to form the
# full path of the file on the disk.

[Files.scsi.MegaIDE100_NT5C]
driver  = d1, MegaIDE.sys, MegaIDE
inf    = d1, MegaIDE.inf
catalog = d1, Mega2k.cat

[Files.scsi.MegaIDE100_NT5L]
driver  = d1, MegaIDE.sys, MegaIDE
inf    = d1, MegaIDE.inf
catalog = d1, Mega2k.cat

[HardwareIds.scsi.MegaIDE100_NT5C]
id="PCI\VEN_1095&DEV_0649&SUBSYS_005D0E11", "MegaIDE"

[HardwareIds.scsi.MegaIDE100_NT5L]
id="PCI\VEN_1095&DEV_0649&SUBSYS_007E0E11", "MegaIDE"

[Config.MegaIDE]
value = "", Tag, REG_DWORD, 1

[HardwareIds.scsi.SYMMPI_2K]

id = "PCI\VEN_1000&DEV_0621", "symmpi"
id = "PCI\VEN_1000&DEV_0622", "symmpi"
id = "PCI\VEN_1000&DEV_0624", "symmpi"
id = "PCI\VEN_1000&DEV_0626", "symmpi"
id = "PCI\VEN_1000&DEV_0628", "symmpi"
id = "PCI\VEN_1000&DEV_0030", "symmpi"

# This section lists the files that should be copied if the user
# selects a particular component option.
#
# <file_type> is one of driver, port, class, dll, hal, inf, or detect.
# See below.
# <source_disk> identifies where the file is to be copied from, and must
# match en entry in the [Disks] section.
# <filename> is the name of the file. This will be appended to the
# directory specified for the disk in the [Disks] section to form the
# full path of the file on the disk.

[Files.scsi.SYMMPI_2K]
driver = d1,symmpi.sys,SYMMPI
inf = d1,symmpi.inf
catalog = d1,symmpi2k.cat

[Config.SYMMPI]

# This section specifies values to be set in the registry for
# particular component options.  Required values in the services\xxx
# key are created automatically -- use this section to specify additional
# keys to be created in services\xxx and values in services\xxx and
# services\xxx\yyy.
#
# <key_name> is relative to the services node for this device.
# If it is empty, then it refers to the services node.
# If specified, the key is created first.
# <value_name> specifies the value to be set within the key
# <value_type> is a string like REG_DWORD.  See below.
# <value> specifies the actual value; its format depends on <value_type>
value = Parameters,dummy,REG_DWORD,0
value = Parameters\PnpInterface,5,REG_DWORD,1

lyljj · 发表于 2007-2-26 21:41:50

cpqcissm.inf内容如下（Smart Array 641, 642, 6400 Controllers）：

Copyright (c) 1999-2003 Hewlett-Packard Development Company, L.P. ALL RIGHTS RESERVED.
; HP Confidential.

[version]
Signature="$WINDOWS NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%COMPAQ%
CatalogFile.ntx86=cpqcissm.cat
CatalogFile.ntia64=cpqcissm.cat
DriverVer=08/13/2003,5.48.0.32

[SourceDisksNames.x86]
1=%DISK%,cpqcissm.sys,,

[SourceDisksNames.ia64]
1=%DISK%,cpqcissm.sys,,

[SourceDisksFiles.x86]
cpqcissm.sys=1,,

[SourceDisksFiles.ia64]
cpqcissm.sys=1,,

[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS

[ControlFlags]
ExcludeFromSelect = *

[Manufacturer]
%COMPAQ%=COMPAQ_HDC

[COMPAQ_HDC]
%smart_5300.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11
%smart_integrated_5i.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11
%smart_532.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11
%smart_5312.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11
%smart_641.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_0046&SUBSYS_409A0E11
%smart_642.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_0046&SUBSYS_409B0E11
%smart_6400.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_0046&SUBSYS_409C0E11
%smart_6400_EM.DeviceDesc%=cpqcissm_Inst, PCI\VEN_0E11&DEV_0046&SUBSYS_409D0E11

[cpqcissm_Inst.ntx86]
CopyFiles = @cpqcissm.sys

[cpqcissm_Inst.ntia64]
CopyFiles = @cpqcissm.sys

[cpqcissm_Inst.ntx86.Services]
AddService = cpqcissm, %SPSVCINST_ASSOCSERVICE%, cpqcissm_Service_Inst, cpqcissm_EventLog_Inst

[cpqcissm_Inst.ntia64.Services]
AddService = cpqcissm, %SPSVCINST_ASSOCSERVICE%, cpqcissm_Service_Inst, cpqcissm_EventLog_Inst

[cpqcissm_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType    = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\cpqcissm.sys
LoadOrderGroup = SCSI Miniport
AddReg       = pnpsafe_pci_addreg

[cpqcissm_EventLog_Inst]
AddReg = cpqcissm_EventLog_AddReg

[cpqcissm_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

[pnpsafe_pci_addreg]
HKR, ,                         "Tag",             %REG_DWORD%,  0x103
HKR, "Parameters\Device",    "NumberOfRequests", %REG_DWORD%,  0x80
HKR, "Parameters\PnpInterface", "5",             %REG_DWORD%,  0x00000001

[Strings]
COMPAQ                      = "Hewlett-Packard Company"
DISK                         = "Smart Array 5x and 6x Controller Support"
smart_5300.DeviceDesc       = "Smart Array 5300 Controller"
smart_integrated_5i.DeviceDesc = "Smart Array 5i"
smart_532.DeviceDesc          = "Smart Array 532 Controller"
smart_5312.DeviceDesc       = "Smart Array 5312 Controller"
smart_641.DeviceDesc          = "Smart Array 641 Controller"
smart_642.DeviceDesc          = "Smart Array 642 Controller"
smart_6400.DeviceDesc       = "Smart Array 6400 Controller"
smart_6400_EM.DeviceDesc    = "Smart Array 6400 U320 EM Controller"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START    = 0
SERVICE_ERROR_NORMAL = 1
REG_EXPAND_SZ       = 0x00020000
REG_DWORD             = 0x00010001

;**Japanese**********************************
[Strings.0411]
COMPAQ                      = "Hewlett-Packard Company"
DISK                         = "Smart Array 5x and 6x Controller Support"
smart_5300.DeviceDesc       = "Smart 傾儗僀 5300 僐儞僩儘乕儔"
smart_integrated_5i.DeviceDesc = "Smart 傾儗僀 5i"
smart_532.DeviceDesc          = "Smart 傾儗僀 532 僐儞僩儘乕儔"
smart_5312.DeviceDesc       = "Smart 傾儗僀 5312 僐儞僩儘乕儔"
smart_641.DeviceDesc          = "Smart 傾儗僀 641 僐儞僩儘乕儔"
smart_642.DeviceDesc          = "Smart 傾儗僀 642 僐儞僩儘乕儔"
smart_6400.DeviceDesc       = "Smart 傾儗僀 6400 僐儞僩儘乕儔"

SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START    = 0
SERVICE_ERROR_NORMAL = 1
REG_EXPAND_SZ       = 0x00020000
REG_DWORD             = 0x00010001

lyljj · 发表于 2007-2-26 21:43:09

OEMSETUP.INF内容如下（Adaptec I2O RAID Adapters for Windows 2000 & XP 32bit）：

;
; Adaptec I2O RAID Host Adapter Drivers for Windows 2000 & XP 32bit
;
; Installation File For Microsoft Windows 2000 & XP 32bit
;
; Version 1.01M-32bit
;
; Edited 07/18/02
;

[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%ADPT%
CatalogFile=dpti2o.cat
;
;If you update this version, make sure you also update
;the DriverVer field in the dpti2o_Install.NT section
;
DriverVer=05/02/2002, 5.3.1.3

[ControlFlags]
ExcludeFromSelect = *
;
; diskid = description[,[tagfile][,<unused>,subdir]]
;
[SourceDisksNames]
1 = %FLOPPY_DESCRIPTION%,dpt_i2o,

;
; filename_on_source = diskid[,[subdir][,size]]
;
[SourceDisksFiles]
dpti2o.sys = 1

[DestinationDirs]
DefaultDestDir = 12

[Manufacturer]
%ADPT%=ADPT

[ADPT]
%PM1554U2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0011044
%PM1654U2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0021044
%PM1564U3-1.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0031044
%PM1564U3-2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0041044
%PM1554U2_NO_ACPI.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0051044
%PM2554U2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C00A1044
%PM2654U2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C00B1044
%PM2664U3-1.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C00C1044
%PM2664U3-2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C00D1044
%PM2554U2_NO_ACPI.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C00E1044
%PM2654U2_NO_ACPI.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C00F1044
%PM3754U2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0141044
%PM3755U2B.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0151044
%PM3755F.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0161044
%PM3757U2_1.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C01E1044
%PM3757U2_2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C01F1044
%PM2865U3-1.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0281044
%PM2865U3-2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0291044
%2100S-1.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C03C1044
%3000S-1.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0461044
%3000S-2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0471044
%3010S-2.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0641044
%3010S-4.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0651044
%2400UDMA.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C05A1044
%2005S.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A511&SUBSYS_C0321044
%2000S.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A511&SUBSYS_C0331044
%2110S.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C0661044
%2405SA.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A501&SUBSYS_C05F1044
%2015S.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A511&SUBSYS_C0341044
%2010S.DeviceDesc% = dpti2o_Install, PCI\VEN_1044&DEV_A511&SUBSYS_C0351044

[dpti2o_Install.NT]
CopyFiles = @dpti2o.sys
;
;If you update this version, make sure you also update
;the DriverVer field in the version section
;
DriverVer=05/02/2002, 5.3.1.3

[dpti2o_Install.NT.Services]
AddService = dpti2o, %SPSVCINST_ASSOCSERVICE%, dpti2o_Service_Install, EventLog_Install

[dpti2o_Service_Install]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType    = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\dpti2o.sys
LoadOrderGroup = SCSI Miniport
AddReg          = pnpsafe_pci_addreg

[pnpsafe_pci_addreg]
HKR,Parameters\Device,"NumberOfRequests",0x00010001,0x40
HKR,Parameters\PnpInterface,"5",0x00010001,0x00000001

[EventLog_Install]
AddReg = EventLog_Add_Register

[EventLog_Add_Register]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

[dpti2o_Install.NT.HW]
DelReg = LegacyScsiportValues

[LegacyScsiportValues]
HKR,Scsiport,BusNumber
HKR,Scsiport,LegacyInterfaceType
HKR,Scsiport,SlotNumber

[Strings]
ADPT = "Adaptec I2O RAID Adapters for Windows 2000 & XP 32bit"
FLOPPY_DESCRIPTION = "Adaptec I2O RAID Adapter Driver Disk for Windows 2000 & XP 32bit"

PM1554U2.DeviceDesc = "PM1554U2 Ultra2 Single Channel"
PM1654U2.DeviceDesc = "PM1654U2 Ultra2 Single Channel"
PM1564U3-1.DeviceDesc = "PM1564U3 Ultra3 Single Channel"
PM1564U3-2.DeviceDesc = "PM1564U3 Ultra3 Dual Channel"
PM1554U2_NO_ACPI.DeviceDesc = "PM1554U2 Ultra2 Single Channel (NON ACPI)"
PM2554U2.DeviceDesc = "PM2554U2 Ultra2 Single Channel"
PM2654U2.DeviceDesc = "PM2654U2 Ultra2 Single Channel"
PM2664U3-1.DeviceDesc = "PM2664U3 Ultra3 Single Channel"
PM2664U3-2.DeviceDesc = "PM2664U3 Ultra3 Dual Channel"
PM2554U2_NO_ACPI.DeviceDesc = "PM2554U2 Ultra2 Single Channel (NON ACPI)"
PM2654U2_NO_ACPI.DeviceDesc = "PM2654U2 Ultra2 Single Channel (NON ACPI)"
PM3754U2.DeviceDesc = "PM3754U2 Ultra2 Single Channel (NON ACPI)"
PM3755U2B.DeviceDesc = "PM3755U2B Ultra2 Single Channel (NON ACPI)"
PM3755F.DeviceDesc = "PM3755F Fibre Channel (NON ACPI)"
PM3757U2_1.DeviceDesc = "PM3757U2 Ultra2 Single Channel"
PM3757U2_2.DeviceDesc = "PM3757U2 Ultra2 Dual Channel"
PM2865U3-1.DeviceDesc = "PM2865U3 Ultra3 Single Channel"
PM2865U3-2.DeviceDesc = "PM2865U3 Ultra3 Dual Channel"
2100S-1.DeviceDesc = "Adaptec 2100S Ultra3 Single Channel"
3000S-1.DeviceDesc = "Adaptec 3000S Ultra3 Single Channel"
3000S-2.DeviceDesc = "Adaptec 3000S Ultra3 Dual Channel"
3010S-2.DeviceDesc = "Adaptec 3010S Ultra3 Dual Channel"
3010S-4.DeviceDesc = "Adaptec 3010S Ultra3 Four Channel"
2400UDMA.DeviceDesc = "Adaptec 2400A UDMA Four Channel"
2005S.DeviceDesc = "Adaptec 2005S Ultra3"
2000S.DeviceDesc = "Adaptec 2000S Ultra3"
2110S.DeviceDesc = "Adaptec 2110S Ultra3"
2405SA.DeviceDesc = "Adaptec 2405SA SATA Four Channel"
2015S.DeviceDesc = "Adaptec 2015S Ultra320"
2010S.DeviceDesc = "Adaptec 2010S Ultra320"

SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START    = 0
SERVICE_ERROR_NORMAL = 1
REG_EXPAND_SZ       = 0x00020000
REG_DWORD             = 0x00010001

lyljj · 发表于 2007-2-26 21:50:23

过几天公司还要再添加服务器，一定第一手时间用你的PE测试，少不了还要麻烦asbai兄了。

		自动登录	找回密码
密码			注册