Kingston DT 101 G2 旋转16G 第3次量产时失败！

ZULGMG

求助！Kingston DT 101 G2 旋转16G 第3次量产时失败，
前几次量产成功的，最近找了个新的ISO镜像，重新量产时失败！现在想恢复原盘也不行，看过各大论坛教程，没找到解决方法，晕了，杯具……

原来用“MP_Ver2162_All”成功过两次了，现在用它失败后看数码论坛说“MP_Ver2162_All”有问题，改用“MP_Ver2159”也不行！

现在能在电脑上看到U盘，为0字节……

原U盘信息：

设备名称: [E:]USB Mass Storage Device(Kingston DT 101 G2 USB Device)
PNP设备ID: VID = 0951 PID = 1642
设备序列号: 001CC0EC2F47F07035F0126C
  设备版本: 1.00
  设备类型: 标准USB设备 - USB2.0高速
芯片制造商: SSS(鑫创)
  芯片型号: SSS6691
产品制造商: Kingston
  产品型号: DT 101 G2

钢口号：04300-543

双Flash：
无主控面的Flash：
TOSHIBA NF 7986
TAIWAN 10259 AE 1
TH58NVG6D2FTA20
带主控面的Flash:
TOSHIBA NF 7055
TAIWAN 10259 AE 1
TH58NVG6D2FTA20
主控芯片：
SSS
6691
H1-M6C
J4801-030B
0946

根据以上判断U盘Flash为： MLC(D2)

量产用恢复的INI配置：

[OEM]
PN=6691 + Toshiba 43nm D2 Normal Flash
Note=ISP:6691_B3-A_20100331_VA10F00_9083.BIN
VID=0x0951
PID=0x1642
VENDOR_NAME="Kingston"
PRODUCT_NAME="DT 101 G2"
STRING_DESC_ENABLE=1
SN_CustomerCode=0x0F   
[FEATURE_SETTING]
FLASH_OP="ALL123"
ID35=1
   
[ISP]
Code=6691_B3-A_20100331_VA10F00_9083.BIN

量产日志：

Device 1:0xB3
MP Version:2.162
INI_File_Name:
Random delay 0 msec
--- Download MP ISP ---
CE-0, Flash ID=98-D7-94-32-76-55-0C-00
CE-1, Flash ID=98-D7-94-32-76-55-0C-00
CE-2, Flash ID=98-D7-94-32-76-55-0C-00
CE-3, Flash ID=98-D7-94-32-76-55-0C-00
--> ROOT is not found
Scan (0,4100)
  Original Defect Block - 0:0:0x0100
  Original Defect Block - 0:0:0x0101
  Original Defect Block - 0:0:0x0102
  Original Defect Block - 0:0:0x0103
  Original Defect Block - 0:0:0x0104
  Original Defect Block - 0:0:0x0105
  Original Defect Block - 0:0:0x0106

……等这里大多以上信息

  Original Defect Block - 3:0:0x0FA6
  Original Defect Block - 3:0:0x0FA7
  ---> Max Bad of Plane (958,959)
  ---> Max BAD/DIE = 959
Total good blocks after SCAN: 7228 / 16400, Bad block=9172
==> 2-Plane mode
Max. Bad Block Allowed = 747(9172)
### Error: Too many bad block.
### Error: Low level format failed ###
SafeErase (0,4100)
  Erase failed Block - 0:0:0x0100
  Erase failed Block - 0:0:0x0101
  Erase failed Block - 0:0:0x0102
  Erase failed Block - 0:0:0x0103
  Erase failed Block - 0:0:0x0104
  Erase failed Block - 0:0:0x0105
  Erase failed Block - 0:0:0x0106
  Erase failed Block - 0:0:0x0107
  Erase failed Block - 0:0:0x0108
  Erase failed Block - 0:0:0x0109
  Erase failed Block - 0:0:0x010A

……等这里大多以上信息

  Erase failed Block - 0:0:0x0EED
  ---> Max Bad of Plane (862,860)
SafeErase (1,4100)
  Erase failed Block - 1:0:0x0000

……等这里大多以上信息

  Erase failed Block - 3:0:0x0FA6
  Erase failed Block - 3:0:0x0FA7
  ---> Max Bad of Plane (958,959)
  ---> Max BAD/DIE = 959

[ 本帖最后由 ZULGMG 于 2010-9-2 23:40 编辑 ]

ZULGMG

修改配置文件为如下后可看到一个622MB的移动盘，可用可读写，晕，杯具……

[OEM]
PN=6691 + Toshiba 43nm D2 Normal Flash
Note=ISP:6691_B3-A_20100331_VA10F00_9083.BIN
VID=0x0951
PID=0x1642
VENDOR_NAME="Kingston"
PRODUCT_NAME="DT 101 G2"
STRING_DESC_ENABLE=1
SN_CustomerCode=0x0F   
[FEATURE_SETTING]
FLASH_OP="ALL123"
ID17=1
ID35=1
   
[ISP]
Code=6691_B3-A_20100331_VA10F00_9083.BIN

多了一行：ID17=1
可是看U盘信息：

  设备名称: [J:]USB 输入设备(Kingston DT 101 G2 USB Device)
PNP设备ID: VID = 15D9 PID = 0A33
设备序列号: 5&&22954613&&0&&2
  设备版本: 1.00
  设备类型: 标准USB设备 - USB2.0高速
芯片制造商:
  芯片型号: A2611D
产品制造商: Kingston
  产品型号: DT 101 G2
  资料下载: (暂缺)

=================================
再次使用以上配置量产，日志：

  

前面的基本一校样，后面多了以下内容：

Erase failed Block - 3:0:0x0FA6
  Erase failed Block - 3:0:0x0FA7
  ---> Max Bad of Plane (958,959)
  ---> Max BAD/DIE = 959
Total good blocks after SCAN: 7228 / 16400, Bad block=9172
==> 2-Plane mode
Adjust Max LBA = 14039040, 1277888
MaxWindows=8/78, MaxLBA=1277888, Size=623 MB
Max BAD of one plane is 959 (962),16400,1,4
RootSector=0x178,Sec/Cluster=32, SuperPage=32 ---> Alignment=8
Boot Block=0x0001,0x0002
Lun0(1277888), Lun1(0), Public=1277888, Secure=0, CDROM=0
Special FE Config = 54-0B-00
Defect Table Block=0x0004
--- Download ISP Code:D:\MP_VER2162_ALL\ISP_CODE\6691_B3-A_20100331_VA10F00_9083.BIN---
--- ISP Code installed.
Lun0(1277888), Lun1(0), Public=1277888, Secure=0, CDROM=0
Public,Secure,CDROM = 1277888,0,0
SN=001A4D5C76C7F09023D514DD
=== Preformat Done ===
Low Level Format DONE
Store INI/ERROR MSG to Block-0x0001:79.
LBATest 10M activate
### Error: CopyTest Fail(Write LBA=0x00000000)
### Error: CopyTest Fail(BLANK LBA=0x00000000)
### CopyTest 10M fail ###
Ending Time: 23:55:37

[ 本帖最后由 ZULGMG 于 2010-9-2 23:58 编辑 ]

ZULGMG

SSS清空软件是那“U3S_SafeErase_V116”吗，不认啊……如果有其它的卡版主给个上来，谢谢了
短接flash也不认

是能看到"0xB3"但点击“Erase ALL”总是提示“No Support Flash”






现在的U盘信息，完整了








现在的U盘容量 16G成了622MB了 *>_<*：



[ 本帖最后由 ZULGMG 于 2010-9-3 15:58 编辑 ]

ZULGMG

哪位朋友有空帮帮忙，谢谢……