RAMOS （内存操作系统）-无忧百科（不断完善中）

liuzhaoyzz · 发表于 2018-9-29 13:18:36

本帖最后由 liuzhaoyzz 于 2018-10-1 20:20 编辑

   You can remove primo program and reboot,then try 3.72 again.
The reason maybe relate to pagefile.sys or hiberfil.sys,You can close them,such as run  powercfg -h off command  as admin,then reboot.
and the disk where 3.72 lies must have 3  times useable space as big as drive C:'s used space .
Your system is English system.
But I think the batch can run under English or Chinese OS system,it doesn't matter.it is just a prompt.

cannot find disk #0, You can also refer to this post:
新系统用3.72装P驱，总是装不上，求助 - RAMOS - 无忧启动论坛 - Powered by Discuz! http://bbs.wuyou.net/forum.php?m ... p;extra=&page=1
Don't install primo manually,the batch will install it automatically.
X86 system maybe need to enable PAE function.
　PAE: bcdedit /set pae forceenable as administrator,then reboot.

2012mshs · 发表于 2018-9-29 14:05:02

I have remove all

liuzhaoyzz · 发表于 2018-10-1 07:17:08

本帖最后由 liuzhaoyzz 于 2018-10-1 07:34 编辑

2012mshs 发表于 2018-9-29 14:05
I have remove all

Remove primo program in your WIN7，I mean remove it in the control panel。Then reboot your computer.Try 3.72 as administrator again.

2012mshs · 发表于 2018-10-1 19:19:33

liuzhaoyzz 发表于 2018-10-1 07:17
Remove primo program in your WIN7，I mean remove it in the control panel。Then reboot your com ...

I do it but never success.

2012mshs · 发表于 2018-10-1 19:23:16

Now I try with Windows 7 from this topic http://bbs.wuyou.net/forum.php?m ... &extra=page%3D1
Install full driver, No pagefile.sys, hiberfil.sys.
Use fool mode (press 0)
Success, but only chinese language

liuzhaoyzz · 发表于 2018-10-1 19:54:01

本帖最后由 liuzhaoyzz 于 2018-10-1 20:41 编辑

Turn the directory “【RAMOS一键批处理多合一V3.7.2】在线制作P驱R驱F驱内存系统工具【密码123456】” into an English name such as "primo3.72" with out blank,
rename "【RAMOS一键批处理多合一V3.7.2】在线制作P驱R驱F驱内存系统工具.CMD" to an English name such as "onkey.cmd"
then try it.
I never try English WIN7,can you post your win7.esd or win7.wim？I will try it soon.
By the way,why not try X64 English WIN7?

2012mshs · 发表于 2018-10-1 21:03:47

本帖最后由 2012mshs 于 2018-10-1 21:05 编辑

liuzhaoyzz 发表于 2018-10-1 19:54
Turn the directory “【RAMOS一键批处理多合一V3.7.2】在线制作P驱R驱F驱内存系统工具【密码12345 ...

Yes, I try change display language windows to english (from http://bbs.wuyou.net/forum.php?m ... &extra=page%3D1), use language pack
I try make ramos again (also i was uninstall Primo ramdisk, reboot)
But it don't success. May problem with code

2012mshs · 发表于 2018-10-1 21:12:04

liuzhaoyzz 发表于 2018-10-1 19:54
Turn the directory “【RAMOS一键批处理多合一V3.7.2】在线制作P驱R驱F驱内存系统工具【密码12345 ...

Also try change to english name.

liuzhaoyzz · 发表于 2018-10-2 07:03:38

本帖最后由 liuzhaoyzz 于 2018-10-2 07:35 编辑

Last night,I downloaded WIN7SP1X86 from msdnitellyou,I installed WIN7 in my computer,and turned the batch 3.72 into english(80% done),I have not try the English version yet,I am on my way of journey,3 days later I will upload an English version.

2012mshs · 发表于 2018-10-2 11:35:28

liuzhaoyzz 发表于 2018-10-2 07:03
Last night,I downloaded WIN7SP1X86 from msdnitellyou,I installed WIN7 in my computer,and tur ...

If I keep commandline display in chinese language, it can work ok. Do you keep a Primo ramdisk server single language? I can't find it.

liuzhaoyzz · 发表于 2018-10-3 07:20:03

Primo ramdisk has only Chinese language version, it is a commercial software.

y7y007 · 发表于 2018-10-3 09:28:06

有英文版本的吧
http://www.romexsoftware.com/en-us/index.html

liuzhaoyzz · 发表于 2018-10-3 10:11:08

果然是有，我没注意。

2012mshs · 发表于 2018-10-3 20:14:04

liuzhaoyzz 发表于 2018-10-3 10:11
果然是有，我没注意。

RAMOS will not work when my system was compact with dism++ (lzx). Is it wrong?

liuzhaoyzz · 发表于 2018-10-3 21:37:13

2012mshs 发表于 2018-10-3 20:14
RAMOS will not work when my system was compact with dism++ (lzx). Is it wrong?

Original system should not be compact,otherwize snapshot can't snap the whole system,then it maybe cause to fail.---------I think.
The batch will compact into RAMOS automatically.so it needn't to compact before the batch run.

liuzhaoyzz · 发表于 2018-10-4 08:35:08

2012mshs 发表于 2018-10-2 11:35
If I keep commandline display in chinese language, it can work ok. Do you keep a Primo ramdisk s ...

Primo ramdisk do have English skin .The screenshot like below .

liuzhaoyzz · 发表于 2018-10-4 18:27:21

2012mshs 发表于 2018-10-3 20:14
RAMOS will not work when my system was compact with dism++ (lzx). Is it wrong?

You can have a look at this new post for English version：
1KRAMOS3.7.3-English - RAMOS - 无忧启动论坛 - Powered by Discuz! http://bbs.wuyou.net/forum.php?m ... p;extra=#pid3654641

2012mshs · 发表于 2018-10-4 20:21:22

liuzhaoyzz 发表于 2018-10-4 18:27
You can have a look at this new post for English version：
1KRAMOS3.7.3-English - RAMOS - 无忧启 ...

Thank you so much. Can you tell with me how to reduce windows to small. Like in your post.

liuzhaoyzz · 发表于 2018-10-4 20:38:21

You can reduce windows with cracked ntlite and dism++,It is a hard work to do it,for it need a lot of time and energe to test.I suggest you looking for the reduced English windows by dab hand.

2012zb7798 · 发表于 2018-10-9 15:19:52

家中有台老机器，ATOM主板，4G内存，安装完系统，显示内存4G，可用内存3.25G，只要一安装Primo Ramdisk就蓝屏，有没有类似情况的小伙伴，或者我是不是可以放弃这台老机器了。

liuzhaoyzz · 发表于 2018-10-9 15:26:27

本帖最后由 liuzhaoyzz 于 2018-10-9 15:28 编辑

确实没碰到过primo蓝屏的情况，你用的32位的系统吗？是WIN7X86还是XP？是安装primo的时候蓝屏，还是用一键的时候蓝屏？没看到你截图啊？
4G内存可以玩精简版XP体验下，直接格式化C盘，做个精简版XP，直接用一键傻瓜模式即可，可以体验下。
但是内存太小了玩起来没什么意思，因为装不了什么软件。4G内存建议用完整版系统。

iPartTao · 发表于 2018-10-10 13:19:45

遇见高人了，这论坛我来对了

charlie427 · 发表于 2018-10-14 22:09:04

谢谢楼主分享

levinsky · 发表于 2018-11-13 09:08:11

2012zb7798 发表于 2018-10-9 15:19
家中有台老机器，ATOM主板，4G内存，安装完系统，显示内存4G，可用内存3.25G，只要一安装Primo Ramdisk就蓝 ...

如果是比较老的945芯片组,那就是先天缺陷,4g内存只有3.25g可用,x86/x64都一样. 可以装精简win7x32 然后可以用一键ramos悠远模式或小生的ramos工具都带压缩的, 系统还有内存2G可用足够了

eastmz · 发表于 2018-11-17 20:18:30

写的真的太好了，但是我得慢慢吸收，感谢

2977 · 发表于 2018-12-3 19:22:47

ramos制作不懂，先学习啦，谢

ohjie5 · 发表于 2018-12-11 23:06:56

学习啦。

忆昔 · 发表于 2018-12-15 22:32:45

留个脚印！

忆昔 · 发表于 2018-12-15 22:32:48

留个脚印！

mulderl · 发表于 2018-12-21 15:51:48

来看看学习一下

		自动登录	找回密码
密码			注册

[讨论] RAMOS （内存操作系统）-无忧百科（不断完善中）

点评

点评