找回密码
 注册
搜索
系统gho:最纯净好用系统下载站投放广告、加入VIP会员,请联系 微信:wuyouceo
查看: 4479|回复: 4

如何修改maxdos8中的网刻菜单的默认项

[复制链接]
发表于 2011-10-16 23:51:22 | 显示全部楼层 |阅读模式
由于本人的机的网卡是NDIS的,而且要选maxdos 中的V5才能驱动,所以我想将maxdos8中的网刻菜单中的默认选项设为 ndis V5的那项,请问有没哪位大大会,请赐教 ,感谢。。。。。。
发表于 2011-10-17 00:12:58 | 显示全部楼层
那你就得解剖MAXDOS里面的P处理,和关键跳转..
回复

使用道具 举报

发表于 2011-10-17 09:27:24 | 显示全部楼层
把config.sys与autoexec.bat发上来,或许有人能帮上忙
回复

使用道具 举报

 楼主| 发表于 2011-10-22 01:29:58 | 显示全部楼层
感谢前面两位的回复,您们的回复使我终于找到了方法,实际上也很简单:就是将config.sys中的cm1中的顺序调换一下即可。

rem cm1=[G. NVIDIA邿濂姒逓v5 & NVIDIA Ethernet Adapter Drive v5.
device=\soft\himem.sys /testmem:off
device=\soft\UMBPCI.SYS /s
devicehigh=protman.dos /I:\maxnet
devicehigh=\maxnet\MaxNFv5.DOS
devicehigh=dis_pkt.dos
devicehigh=\maxnet\NDIS.DOS  
rem cm1=]

rem cm1=[B. NDIS邿濂姒逓 & Packet NETWORK CARD Drive.
device=\soft\himem.sys /testmem:off
rem cm1=]
rem cm1=[C. NVIDIA邿濂姒逓v1 & NVIDIA Ethernet Adapter Drive v1.
device=\soft\himem.sys /testmem:off
device=\soft\UMBPCI.SYS /s
devicehigh=protman.dos /I:\maxnet
devicehigh=\maxnet\MaxNFv1.DOS
devicehigh=dis_pkt.dos
devicehigh=\maxnet\NDIS.DOS  
rem cm1=]
rem cm1=[D. NVIDIA邿濂姒逓v2 & NVIDIA Ethernet Adapter Drive v2.
device=\soft\himem.sys /testmem:off
device=\soft\UMBPCI.SYS /s
devicehigh=protman.dos /I:\maxnet
devicehigh=\maxnet\MaxNFv2.DOS
devicehigh=dis_pkt.dos
devicehigh=\maxnet\NDIS.DOS  
rem cm1=]
rem cm1=[E. NVIDIA邿濂姒逓v3 & NVIDIA Ethernet Adapter Drive v3.
device=\soft\himem.sys /testmem:off
device=\soft\UMBPCI.SYS /s
devicehigh=protman.dos /I:\maxnet
devicehigh=\maxnet\MaxNFv3.DOS
devicehigh=dis_pkt.dos
devicehigh=\maxnet\NDIS.DOS   
rem cm1=]
rem cm1=[F. NVIDIA邿濂姒逓v4 & NVIDIA Ethernet Adapter Drive v4.
device=\soft\himem.sys /testmem:off
device=\soft\UMBPCI.SYS /s
devicehigh=protman.dos /I:\maxnet
devicehigh=\maxnet\MaxNFv4.DOS
devicehigh=dis_pkt.dos
devicehigh=\maxnet\NDIS.DOS   
rem cm1=]
rem cm1=[A. Packet邿濂姒逓 & Packet NETWORK CARD Drive.
device=\soft\himem.sys /testmem:off
rem cm1=]

rem cm1=[H. NVIDIA邿濂姒逓v6 & NVIDIA Ethernet Adapter Drive v6.
device=\soft\himem.sys /testmem:off
device=\soft\UMBPCI.SYS /s
devicehigh=protman.dos /I:\maxnet
devicehigh=\maxnet\MaxNFv6.DOS
devicehigh=dis_pkt.dos
devicehigh=\maxnet\NDIS.DOS  
rem cm1=]
回复

使用道具 举报

发表于 2011-10-22 05:55:17 | 显示全部楼层
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|捐助支持|无忧启动 ( 闽ICP备05002490号-1|闽公网安备35020302032614号 )

GMT+8, 2026-5-16 07:43

Powered by Discuz! X5.0

© 2001-2026 Discuz! Team.

快速回复 返回顶部 返回列表