制作免软驱的全厂牌SATA/RAID WinXP安装光盘简明教程

crabsoft · 发表于 2004-9-20 00:55:00

[UploadFile=34_4454.rar]制作免软驱的全厂牌SATA/RAID WinXP安装光盘简明教程

天地沙鸥 · 发表于 2004-9-20 08:21:29

第二步：把第三方SATA/RAID控制器按照无人值守安装的规定做到WindowsXPSP1文件夹（C:\XPCD）中。 CODE
"3ware Escalade 6000 Series ATA RAID Controller"  - 1.11.00.001, 12/19/2001
"3ware Escalade 7000/8000 Series ATA RAID Controllers"  - 1.14.00.004, 10/29/2003
"ACARD AEC62x0 ATA133/SATA Controller" - 1.0.5.4, 05/31/2002
"ACARD AEC67160 PCI Ultra160 LVD/SE SCSI Adapter"  - 1.01, 07/29/2001
"ACARD AEC671X PCI Ultra/W SCSI Controller" - 5.22, 02/23/2002
"ACARD AEC68x0 ATA133/SATA RAID Controller" - 2.10, 08/23/2003
"ACARD AEC68X5 PCI 4 Channel RAID Controller" - 1.0.5.3, 07/18/2003
"Adaptec HostRAID Ultra320 Controllers" - 1.02.063, 10/16/2003
"Adaptec I2O SCSI RAID Controllers" - 5.3.0.10, 10/03/2001
"Adaptec SATA/SCSI RAID Controller Series" - 4.1.0.7244, 04/06/2004
"Adaptec Serial ATA RAID 1210SA Controller" - 1.00.08.0, 11/17/2003
"Adaptec Ultra160 SCSI Controllers" - 6.2.0000.000, 03/19/2002
"Adaptec Ultra320 SCSI Controllers" - 3.0.000.000, 02/17/2004
"AMD PCI Bus Master IDE Controllers" - 8.2.2.2, 07/01/2003
"HighPoint HPT366 ATA66 Controller" - 1.25.0.10, 03/31/2000
"HighPoint HPT371 ATA100 Controller" - 1.22, 10/20/2002
"HighPoint HPT3xx ATA100 RAID Controllers" - 2.351, 01/05/2004  - VERIFIED OK
"HighPoint HPT374 ATA133 RAID Controllers" - 3.0.4, 05/08/2004
"HighPoint RocketRAID 182x SATA Controller" - 1.0.4, 02/18/2004
"Intel 82801ER SATA RAID Controller" - 3.5.0.2568, 06/17/2003 - VERIFIED OK
"Intel SCSI RAID Controllers"    - 5.3.0.13, 06/23/2003
"ITE IT8212 ATA RAID Controller" - 1.6.1.8, 01/13/2004  - VERIFIED OK
"LSI FC4000/7000 Ultra320 SCSI RAID Controllers"  - 1.10.00, 04/12/2004
"LSI MegaRAID Controllers 1"    - 4.1.0709.2003, 07/09/2003
"LSI MegaRAID Controllers 2"    - 6.41.32, 01/08/2004
"Mylex AcceleRAID/eXtremeRAID SCSI RAID Controllers"  - 7.00.16.0, 11/15/2002
"Mylex DAC SCSI RAID Controllers" - 6.03.10.0, 10/25/2001
"NVIDIA NForce ATA/SATA Controllers" - 5.10.2600.0412, 01/13/2004
"NVIDIA NForce ATA RAID Controller" - 5.10.2600.0412, 01/13/2004
"Promise FastTrak 37x/S150 TX4000 Series Controllers"  - 1.00.0.37, 08/06/2003
"Promise FastTrak/66/100/TX2/TX4/TX2000 Controllers"  - 2.00.0.34, 04/25/2003
"Promise FastTrak S150 SX4/SX4000 Series" - 1.02.0000.9, 06/30/2003 - VERIFIED OK
"Promise SATA150 TX Series Controller" - 1.00.0.27, 06/12/2003
"Promise SuperTrak SX6000 Controller" - 1.10.0.41, 11/26/2002
"Promise UltraXXX Series Controllers" - 2.0.0.43, 05/16/2003
"QLogic QLA12160 PCI Ultra160 SCSI Controller" - 7.21.1.1, 03/01/2002
"Silicon Image SiI 0649 ATA100 RAID Controller" - 1.0.0.0, 06/09/2001
"Silicon Image SiI 0680 ATA133 Controller" - 1.0.0.12, 03/15/2002
"Silicon Image SiI 0680 ATA133 RAID Controller" - 1.0.1.7, 05/31/2002
"Silicon Image SiI 3112 SATALink Controller" - 1.1.0.52, 09/04/2003  - VERIFIED OK
"Silicon Image SiI 3112 SATARaid Controller" - 1.0.0.47, 02/03/2004
"Silicon Image SiI 3114 SATALink Controller" - 1.2.0.5, 09/03/2003  - VERIFIED OK
"Silicon Image SiI 3114 SATARaid Controller" - 1.0.0.7, 02/03/2004  - VERIFIED OK
"Silicon Image SiI 3124 SATALink Controller" - 1.0.0.7, 12/12/2003
"Silicon Image SiI 3124 SATARaid Controller" - 1.0.0.2, 02/02/2004
"SiS 180/181 RAID Controllers"    - 5.1.1039.1050, 12/09/2003
"SiS 5513/5518 IDE UDMA Controllers" - 5.1.1039.2041, 09/15/2003
"VIA ATA/ATAPI Host Controller"    - 5.1.2600.104, 10/30/2003
"VIA RAID Controller"    - 5.1.2600.210, 10/17/2003
"VIA Serial ATA RAID Controller" - 5.1.2600.220, 10/17/2003 - VERIFIED OK

下载后，扔到C:\XPCD目录里，执行该.exe文件（按提示，点decompression），此时这个程序会把上面的那一大串驱动解压到c:\xpcd\$oem$\里（程序自动生成的）。
2、执行完该程序后，c:\xpcd下会有两个.cmd文件，我们只执行patch.cmd即可，作用是添加硬件设备信息和驱动文件信息到c:\xpcd\i386里的textsif.sif以及dosnet.inf，此外还会把.sys的驱动文件都打包成.sy_的形式复制到c:\xpcd\i386里。
到底下载哪个程序？没有名称，没有连接

Delacral · 发表于 2004-9-20 09:22:25

恩，我也正在疑惑中，搞不明白！

sblinux · 发表于 2004-9-20 09:24:21

是呀，我也没有明白上述的意思，这一大堆东西是什么呀，.exe文件在哪呀，请详细说一下好吗？

jrs · 发表于 2004-9-20 10:18:50

楼主好像漏了什么东西吧，能补全吗？

天地沙鸥 · 发表于 2004-9-20 10:53:06

我的是ICH5R，我把iaStor.SY_放到i386文件夹下面，用以下的CODE可以吗？
[SourceDisksFiles]
iaStor.sys = 1,,,,,,,4,0,0,,1,4
[HardwareIdsDatabase]
PCI\VEN_8086&DEV_24DF&CC_0104 = "iaStor"
[SCSI.Load]
iaStor = iaStor.sys,4
[SCSI]
iaStor = "Intel(R) 82801ER SATA RAID Controller"

cgistar · 发表于 2004-9-20 15:52:23

原来是这篇贴啊，其实方法很早就出来了，我贴一个全的，我的驱动包有近4M传不上来，不然我传上来了，连同修改好的文件，我已经成功安装了好几台机子了！
How to make a Windows XP Pro boot CD with all the nForce2 drivers!
this process will create an XP boot cd that won't require you to install SATA or nForce drivers, as they'll all be present upon the completion of setup. i made this because i hate floppy drives (die floppy DIE!), and i was getting sick of having to connect a floppy drive just to get my SATA RAID disks recognized during setup. one thing lead to another and i wound up creating a boot cd that handled all my drivers to save myself the headache.
this has borrowed heavily from various sources on the net. most of the pertinent sites are linked herein.
1) copy all the files from your XP cd to a temporary folder (let's call it C:\XPSource)
2) slipstream SP1 if you haven't already: http://www.tacktech.com/display.cfm?object=article.cfm&id=160
3) copy your now slipstreamed cd files into a folder (say, C:\XPCD)
4) download the newest drivers for your motherboard. i've got an asus a7n8x deluxe, so i'm using the 2.16 drivers. their site doesn't seem to be responding to me at the moment, but the file was named "nf2v116_wxp.zip". also grab the 3com drivers, and whatever other drivers you might need as well (say, video card or whatever else)
5) make a directory under C:\XPCD named $OEM$
6) make a directory under that called $1
7) make yet another directory under that called Drivers. you should now have something like C:\XPCD\$OEM$\$1\Drivers
8) extract your drivers to subdirectories of C:\XPCD\$OEM$\$1\Drivers. the asus drivers all come in separate directories (XP\MemCtl, XP\Ethernet, etc). make note of the subdirectories you've created, as we'll have to provide a list of these directories to XP setup later. update: these files and folder names MUST have 8.3 compatiable names. this means that none of the files or folders can have names longer than 8 characters. it won't work if they do! (thanks lanakaian!)
9) download the newest SATA RAID drivers from SI. as of this post, you can get them here.
10) extract the "Si3112r.sys" file into the i386 folder (C:\XPCD\i386\Si3112r.sys)
11) extract the whole SATA driver archive (all the files) to a directory under Drivers, say C:\XPCD\$OEM$\$1\Drivers\SATA.
12) find the TXTSETUP.SIF file in the i386 folder (C:\XPCD\i386\TXTSETUP.SIF) and open it in NOTEPAD.
13) add the following line under [SourceDisksFiles]
si3112r.sys = 1,,,,,,_x,4,1
14) add the following line under [HardwareIdsDatabase]
PCI\VEN_1095&DEV_3112&SUBSYS_61121095 = "Si3112r"
15) add the following line under [SCSI.Load]
si3112r = si3112r.sys,4
16) add the following line under [SCSI]
si3112r = "Silicon Image SiI 3112 SATARaid Controller"
17) save your changes to TXTSETUP.SIF - we're done with this file. this file is for the text-based portion of the install (before we get XP's GUI). it keeps us from having to insert a floppy and pressing F6 during setup.
18) now we need to handle the GUI portion of the setup. create a text file under C:\XPCD\i386 called "WINNT.SIF". this is a file that XP setup will look for to automate the GUI portion of the setup. this is called an "unattended installation", and is used to answer some of the questions XP asks during the installation (and even some questions it doesn't ask). this file is called an "answer file". for more on setting up a custom unattended install, look here: http://www.tacktech.com/display.cfm?ttid=202
19) open C:\XPCD\i386\WINNT.SIF in notepad, and insert the following lines:
[Data]
AutoPartition=0
MsDosInitiated="0"
UnattendedInstall="Yes"
[Unattended]
UnattendMode=ProvideDefault
OemPreinstall=Yes
OemSkipEula=Yes
NoWaitAfterTextMode=1
NoWaitAfterGUIMode=1
TargetPath=\WINDOWS
DriverSigningPolicy=Ignore
OemPnPDriversPath=Drivers\ATI;Drivers\nForce\3Com;Drivers\nForce\AudioDrv;
Drivers\nForce\AudioUtl;Drivers\nForce\Ethernet;Drivers\nForce\GART;
Drivers\nForce\MemCtl;Drivers\nForce\nvIDE;Drivers\nForce\IDE;
Drivers\SATA;Drivers\nForce\SMBus
[GuiUnattended]
OEMSkipWelcome = 1
[UserData]
ProductKey=12345-ABCDE-67890-FGHIK-12345
FullName=""
OrgName=""

20) here's the important bit: look at the OemPnPDriversPath entry.
PUT IT ALL ON THE SAME LONG LINE!!! not on 4 lines like above - i only put it on 4 lines because the forum will then stretch the page wide enough to fit it and you'll wind up scrolling left and right for the whole damn document.
this line will tell XP setup where to look for the .INF files for each of your devices. it will look in these paths first before checking it's own database of device drivers. the paths given are relative to the $OEM$\$1 folder you created. that is, "Drivers\ATI" tells it to look for a .INF file under C:\XPCD\$OEM$\$1\Drivers\ATI. change this line to point to the paths for all the device drivers that you've downloaded, seperated by ";"
21) change the product key to match your key and you won't have to enter it during installation. otherwise, you can just remove that line
22) again, check out how to do a custom unattended installation from the link above if you want more settings changed - you can setup a lot of things that you normally do manually after the installation in this answer file. save the C:\XPCD\i386\WINNT.SIF answer file and close notepad.
23) burn it to a bootable CD by following the guide here: http://www.tacktech.com/display.cfm?object=article.cfm&id=160
that should do it. post here if you have any problems (or success!), and i'll try to field any questions.

sblinux · 发表于 2004-9-20 16:33:26

有中文的吗，我们的英文很不好呀，看不明白。

cgistar · 发表于 2004-9-20 16:47:57

简单的翻译一下！
1、建立XPCD文件夹(如, C:\XPCD)
2、将XP光盘内容全部拷入文件夹中
3、再建立C:\XPCD\$OEM$\$1\Drivers 文件夹
4、将你需要集成的驱动放入C:\XPCD\$OEM$\$1\Drivers中
5、下载SATA RAID的驱动
6、释放"Si3112r.sys" 文件到C:\XPCD\i386中，(C:\XPCD\i386\Si3112r.sy_)，请自行用CAB压缩一下！
7、将其实的STAT驱动释放到Drivers下，如C:\XPCD\$OEM$\$1\Drivers\SATA下
8、在i386 中找到 TXTSETUP.SIF 文件，如(C:\XPCD\i386\TXTSETUP.SIF)，用记事本打开进行编辑
9、在[SourceDisksFiles] 加入
si3112r.sys = 1,,,,,,_x,4,1
10、在[HardwareIdsDatabase] 中加入
PCI\VEN_1095&DEV_3112&SUBSYS_61121095 = "Si3112r"
11、在[SCSI.Load] 加入
si3112r = si3112r.sys,4
12、在[SCSI] 加入
si3112r = "Silicon Image SiI 3112 SATARaid Controller"
13、保存TXTSETUP.SIF 文件

14、用记事本打开 C:\XPCD\i386\WINNT.SIF 并插入下列行
[Data]
AutoPartition=0
MsDosInitiated="0"
UnattendedInstall="Yes"
[Unattended]
UnattendMode=ProvideDefault
OemPreinstall=Yes
OemSkipEula=Yes
NoWaitAfterTextMode=1
NoWaitAfterGUIMode=1
TargetPath=\WINDOWS
DriverSigningPolicy=Ignore
OemPnPDriversPath=Drivers\SATA
[GuiUnattended]
OEMSkipWelcome = 1
[UserData]
ProductKey=12345-ABCDE-67890-FGHIK-12345
FullName=""
OrgName=""

15、注意：在.inf文件中 "Drivers\SATA" 就是对于 C:\XPCD\$OEM$\$1\Drivers\SATA. 如有多个，请加；号
16、OK,刻盘吧

crabsoft · 发表于 2004-9-20 17:56:53

原文中就没有提供.exe文件

弄潮儿-NET · 发表于 2004-9-20 19:34:57

下面引用由cgistar在 2004/09/20 03:52pm 发表的内容：
原来是这篇贴啊，其实方法很早就出来了，我贴一个全的，我的驱动包有近4M传不上来，不然我传上来了，连同修改好的文件，我已经成功安装了好几台机子了！
How to make a Windows XP Pro boot CD with all the nFo ...

你可以分卷压缩成445K,再分别一个一个上传即可.

天地沙鸥 · 发表于 2004-9-20 20:18:51

我等着你的文件那

天地沙鸥 · 发表于 2004-9-20 21:11:06

我自己的还是不行

cgistar · 发表于 2004-9-20 23:25:02

[UploadFile=34_4454_13.rar]好办法，共4个文件，我用winrar 3.3压缩，产生不能解压的情况请升级一下你的winrar，上传后可能会改变文件名，自己改一下吧！
sataxp.part01.rar

cgistar · 发表于 2004-9-20 23:26:11

[UploadFile=34_4454_14.rar]sataxp.part02.rar

cgistar · 发表于 2004-9-20 23:27:07

[UploadFile=34_4454_15.rar]sataxp.part03.rar

cgistar · 发表于 2004-9-20 23:29:20

[UploadFile=34_4454_16.rar]sataxp.part04.rar
直接将这个压缩包放入XP光盘目录下就可以了！
cdimage.exe -l"VRMPVOL_CN" -t08/17/2004,12:00:00 -h -j1 -b"E:\winxpcd.bif" -o -w1 -m "F:\XPCD" "F:\xp sp2-vrmpvol_cn_stat.iso"
再用cdimage制作一下ISO文件，就可以刻盘了

cgistar · 发表于 2004-9-20 23:30:37

[UploadFile=34_4454_17.rar]这个是cdimage所需要用到的XP光盘启动文件winxpcd.bif

cgistar · 发表于 2004-9-20 23:32:55

[UploadFile=34_4454_18.rar]我再附上Pure Krome作出的另一种制作方法，里面附有流程图图片及说明！
也是4个RAR文件，下载后自己改一下名，再解压缩
Steps.part1.rar

cgistar · 发表于 2004-9-20 23:33:59

[UploadFile=34_4454_19.rar]Steps.part2.rar

cgistar · 发表于 2004-9-20 23:34:50

[UploadFile=34_4454_20.rar]Steps.part3.rar

cgistar · 发表于 2004-9-20 23:35:57

[UploadFile=34_4454_21.rar]Steps.part4.rar

cgistar · 发表于 2004-9-20 23:41:39

用第一种改sif文件的方法，可以清楚的看到在XP光盘启动后，SATA驱动的加载情况，并且在复制文件结束后，安装盘下有Drivers这个驱动目录！

天地沙鸥 · 发表于 2004-9-21 00:07:37

多谢了

sblinux · 发表于 2004-9-21 09:37:25

哈哈，太感谢了！！

zylill · 发表于 2004-9-21 11:07:56

你在传一遍吧

天地沙鸥 · 发表于 2004-9-21 14:42:18

谢谢了，我用你的文件也制作成功！

saab · 发表于 2004-9-21 15:23:46

[UploadFile=34_4454_27.rar]8....是怎么把sata/raid/scsi驱动集成到里面的？
引用:
1、在C盘建立一个xpcd目录（当然建到其它也可以，要有足够空间），将原版winXP CD根目录下文件和i386目录拷贝到刚才建立的xpcd目录中。
2、从 MSFN http://www.ryanvm.net/msfn/raiddrivers_1.01.exe
下载RyanVM's RAID/SATA/SCSI Driver Update for Unattended Windows XP Installs ,解压后，拷贝到xpcd下，出现覆盖提示都点“是”。现在xpcd目录下新增了dosnetadd.txt、patch.cmd等5个文件和$OEM$目录。
3、双击运行patch.cmd，自动对dosnet.inf和txtmode.sif进行修改，并自动删除了dosnetadd.txt、patch.cmd、txtsetupadd.txt三个文件，余下的raidcompress.cmd和read mefirst.txt也可自己手工删除。
4、将下面附件WINNT.SIF，放到xpcd\i386下。这个winnt.sif文件可用记事本打开，对其中的用户名、公司名、安装序列号、电话区号等要根据自己的填好。
5、将XPCD下的内容烧录成MS光盘启动安装光盘，就可光盘启动安装了。我是用ultruISO打开一个原版镜像用替换法进行制作的。
支持SATA硬盘

zhanghaihui5 · 发表于 2004-10-13 22:55:27

哪有现成的带sata的xp卖？

jssyq · 发表于 2004-10-14 08:01:15

不错谢谢分享

		自动登录	找回密码
密码			注册

制作免软驱的全厂牌SATA/RAID WinXP安装光盘简明教程